Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Other Industrial Filtration Equipment

1um/10'' Activated Carbon Block Filters for CTO Removal, 1.filtration pore:1,5,10um, 2.OD:26- 120mm ID:10-40mm, 3.Manufacture - details see: https://www.machineto.com/1um-10-activated-carbon-block-filters-for-cto-removal-10229344

1um/10" Carbon Block Filters for CTO Removal

Advantage:

1.The activated carbon block filter have the adsorption and Physical filtration function. Because the AC don’t just have the adsortion but also can filtration the Large particles of impurities, Effectively reduce the pollution of the water quality of the physical

2.Performance can be adjusted up to 0.1um Min. It is much better than the membrane in the market

3. The blackwater is less than the granular activated carbon when it outflow. There will never come outer the blackwater after your first time using .It wil not like the granular activated carbon .after the water washing will be anti-adsorption, Form the secondary pollution.

4.The material is small than 80mesh powder activated carbon .specific surface area is huge, so the performance can be fully realized.

Application

A. Drinking water

B. Plating liquid

C. Food insdutry

D. Industry water

Removal Chlorine,

Bad taste and odor,

Chloramines,

Fine sediment,

Giardiaand Cryptosporidium cysts,

Organic chemicals such as pesticides and solvents,

and Heavy metals such as lead and mercury.

Specification:

Filter medium	nut-shell carbon, coal carbon,,coconut shell carbon,wood carbon
Relative filtration pore size	1,5,10 µm
Length	10",20",30",40"
Diameter	OD:26- 120 mm ID: 10-40 mm
Max. operating temperature	50°C
Max. positive pressure	0.4 MPa (25°C)
Others	special requirement of diameter and end caps can be customized

Producing

1.Chosing the material,

2.Mixing the activated carbon with the polymer melt into a porous material .

3.Put the mixing material into the special molds.

4.Sintering in the high temperature at 200-300 °C

5.product testing

6.Packing