Automatic Tarpaulin Seam Machine

High Efficiency Automatic Tarpaulin Seam Machine

Tarpaulin Seam MachineApplication:laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.

Tarpaulin Seam Machinemay save more manpower and work field, for example, a PVC jointed painting with 200 meters long surface can be easily coalesced together and well matched, all the works can be well finished by a single person on only a heat-resistant and smooth base ground about 30 square meters.

When useTarpaulin Seam Machine:

1. Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge;

2. Turn on the machine, prepare warm up about 2 minutes;

3. Bring up the machine, and place the roll at the end of the overlap edge;

4. According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the

machine start running, after go pass the overlap edge, the two disjunct banner will be well joined in one.

Tarpaulin Seam MachineParameter:

1. Alternant electric voltage: 220V/50Hz;
2. Upper limit power: 2000W ;
3. Adjustable work temperature: 50-600°C;
4. Adjustable: self-move speed 0.8-15M/per minute;

5. Specification: 450*310*320mm

6. Whole weight: 10 kg;

7. Splicing width: 2-5cm.