Wheel Sand Washing Machine For Silica Sand In Construction

wheel sand washing machine

Introduction

Coal washing machine is a kind of wheeled washing equipment, and can clean and separate the dust and powder from the sand. It is mainly used in building site, gravel plant, concrete dam building site of hydropower station, etc., and with features of high degree cleaning-up, reasonable structure, large capacity, low power consumption, small loss of the sands during the washing process, especially for that the drive parts of the sand washing machine are separated from water and sands, it has lower failure rate than the usual sand washing machine

Woking Principle

When the machine works, through the V belt and the speed reducer, the electrical machinery makes the gear reduction and then drives the impeller rotate slowly. The sand and crushed stone enters the tank washer through the feedertrough, driven by the impeller they roll and grind mutually. Through co-grinding, the impurity covers on the surface of the sand and crushed stone as well as foreign matters with small proportion are removed. At the same time, the water vapor level surrounding sand and crushed stone is distructed thus favors the dehydration. Meanwhile, adds water to create a strong water flow, promptly carries off the impurity and the small proportion foreign matters, and discharge from the overflow port tank washer, completes the cleaning action. The clean sand and crushed stone is carried off by the leaf blade, and is finally poured into the discharge chute from the revolving impeller, completes the cleaning action.

Technical Data