Sand blasting machine for sand rock ore

Facebook Twitter LinkedIn Google Google+

1. The material enters the system granulated substance machine by the feeder hopper, divides into after a minute glassware the material two parts, a part enters high speed revolving by a minute glassware among the impeller, in the impeller by the high acceleration, its acceleration may reach several hundred time of gravity accelerations, then projects by 60-70 meters/second speeds from the impeller three equispaced's flow channels.

2. First with all around from receives a part of material impact grinding which by a minute glassware falls.

3. Then attacks in together a whorl cavity in the material lining, by the material lining bounce, on diagonal is attacked the whirling motion cavity the crown, also changes its heading, the deflection downward movement, from impeller passageLaunches the material forms the continual material curtain.

4. The material down to receives two times the multiple probability hit, the friction and the attrition shattering action together in the whirling motion stave cavity.

5. The material which breaks by the lower part dump mouth is discharged. Forms the close up with the circulation screening system, generally circulates three times then stave becomes the material below 20 items.

6. Under entire in stave process, material mutually voluntarily impact grinding, not with metal part immediate contact, but has the impact, the friction with the material lining to crush, this reduced the angle pollution, lengthens the machinery attrition time.

7. The whirling motion cavity interior ingenious air current from the circulation, eliminated the dust pollution.

Sand hammer hit it can be 50 mm below the ore or incomplete separation tailings, ore minerals were broken, the useful metals from the ore in the isolated, according to the requirements of the mineral particle concentrator crushing in 1-180, and then enter the table sorting.It is suitable for the small mine, to a certain extent instead of ball mill.Easy installation, easy operation, less investment, fast effect.Hammer crusher with a hammer for the main components (also known as hammer) of the rotor.Rotor from the spindle, disk, composed of pin and hammer.Motor drives the rotor high-speed rotation in the crushing cavity.Material from the upper mouth to feed into the machine, by the high-speed movement of the hammer blow, impact, shear, abrasive and grinding.The lower part of the rotor, a sieve plate, crushing material in less than sieve size fractions discharged through the sieve plate, sieve size greater than the coarse grain resistance continue to remain in the sieve and grinding by the hammer blows, and finally discharged through the sieve plate machine.

In the actual broken ore can be chosen in different specifications mesh, mesh for a minimum of 2 mm