Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drum Drying Equipment

1.Reliable operation, 2.Responsible structure, 3.Covnenient for transportation, 4.High output and high dry capacity - details see: https://www.machineto.com/hot-selling-good-performance-rotary-drum-dryer-0086-15838061759-10287608

hot selling good performance rotary Drum dryer 0086-15838061759

Technical parameters:

Rotary dryer is the choice for high throughput capacity applications involving high

moisture, friable, free-flowing commodity products and by-products. A rotating drum and strategically positioned flights combine to lift and

shower product evenly through the

air stream. Thermostatically controlled discharge air temperature assures precise

final moistures and great

sensitivity to varying product conditions. Single-pass or three-pass configurations are available to match product characteristics. Heating options

include steam, gas, oil,

thermal oil and auxiliary .

After the damp raw material put into the dryer from on end, it is turned over through string-up rake inside the cylinder and distributed uniform in the dryer and contacted with

countercurrent hot air fully.

It speeds up heat and mass conducting of dry. During the oeriod of dry. raw material is effected by stirring-up rake with gradient and hot air. it can be moved and passed through the dry

region and to star valve and then

discharge the finished product.

Technical parameters:

Model	Diameter (mm)	Length(m)	Power(kw)	revolution(r/min)
HZG6	600	4,5,6,7,8	3-5.5	3-20 adjustment
HZG8	800	4,5,6,7,8,9,10	5.5-7.5
HZG10	1000	6,7,8,9,10,11,12	5.5-7.5
HZG12	1200	6,8,10,12,14,16	7.5-11
HZG15	1500	8,10,12,14,16,18	11-15
HZG18	1800	8,10,12,14,16,18,20	15-18.5
HZG22	2200	10,12,14,16,18,20,22,25	18.5-22
HZG24	2400	12,14,16,18,20,22,25	22-30

Item(m)	capacity(t/h)	revolution(r/min)	motor power(kw)	install angle(degree)	Temp.of final
f1.0×5.0	0.5-1.2	0.6-6	4	3-5	=1.5%
f1.2×6-10	1.5-3	0.6-6	5.5	3-5	=1.5%
f1.5×12-18	3-5.5	0.6-6	15	3-5	=1.5%
f1.8×12-18	5-6.5	0.6-6	18.5	3-5	=1.5%
f2.2×12-22	7-12	0.6-6	22	3-5	=1.5%
f2.4×15-20	9-15	0.6-6	30	3-5	=1.5%
f3.0×25	16	0.6-6	55	3-5	=1.5%

Wood Pellet Line FLOWCHAT

Pelletizing is the process of making waste materials into solid fuel. The objects are used for burning purposes.

Wood Pellet is one of the most commonly used pelletizing materials. Wood Pellet can be made from any type

of Agro-Forestry waste: Groundnut-shell • Sugarcane Biogases • Caster Shells/Stalk • Saw dust • Coffee Husk • Paddy Straw • Sunflower Stalk •

Cotton Stalks • Tobacco waste • Mustard Stalk • Jute waste • Bamboo Dust • Tea waste • Wheat Straw •

Palm husk • Soybeans husk • Coir Pitch Barks/Straws • Rice Husks • Forestry wastes • Wood Chips and

many other Agro wastes. But the Moisture Content Should be Less than 12%, grain size is below 5*5mm .