Home  >  Packaging Machinery  >  Packaging Forming Machines

It is a good equipment to produce double-side PE-coated beverage cups, ice cream cups and coke cups. - details see: https://www.machineto.com/fully-automatic-high-speed-paper-cup-machine-10060482

Fully Automatic High Speed Paper Cup Machine

Brief Introduce:

DY-LAB model was developed on the basis of imported technologies and combination of advanced domestic and foreign technologies. It is the first creation at home. It can sutomatic feed paper, weld through ultrasonic wave(binding the cup wall), oil, punch, heat, knurl, roll side, discharge cups, continually process, test through photoelectric cell, alarm upon encountering troubles and count.

The characteristic of the machine:

1. Automatic control adopts optically controlled non-contact switch,

2. Micro-controlled transducer,

3. Step-less speed adjustment,

4. Paper Cup-fan-wall body sealed byUltrasonic System,

5. Paper Cup bottom sealed by heater.

6. Full automatic,

7. Easy changing molds produce different sizes paper cups,

8. Easy operating by operator (one operator is enough),

9. Easy maintenance with minimum cost,

10. Cheap operating cost and low investment,

11. Amelioration:Air compressor aren't required for this type paper cup machine when the paper weight under 300gsm

Technical data:

1.Cup Use : hot drinks(hot coffee cups, hot water cups), cold drinks paper cups(ice-cream cups),all kinds of beverage, and some other special use.

2. Cup Size : 7oz ~32oz

Raw material : 170~~350gsm Single or Double PE coated paper

3. Output : 65-80 pcs/min.
4. Maximum cup dimensions
-max. top diameter : 145mm
- max. cup height : 178mm
5. Minimum cup dimensions

- min. top diameter : 50mm

- min. cup height : 50mm
6. Electrical requirement : 380V or 220V, 50Hz
7. Electric consumption : 11KW
8. Air consumption : approx 0.5cbm/min
9. Machine dimensions : 2850mm×1700mm×1750mm

10. Machine Weight :2,800kgs