Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Other Welding Equipment

1.Can suitable for the entire component, especially Micro BGA component, 2.Integrated and adjustable Infrared, 3.Fast shipping - details see: https://www.machineto.com/digital-soldering-station-t862-mobile-phone-repairing-and-hot-air-soldering-station-10137560

IRDA SMD&BGA Rework station SW-T862

Introduction

The T862 uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.

Main Features

1---Unlike Air Re-Work systems, The T-862 uses an Infrared source and optics totarget heat

to individual components without dislodging other SMT parts by way of eddies air currents.
2---Infrared soldering technology with independent exploration capabilities via one focus lenses

which is included in the package.
3---Technician focused infrared heat is easy to target most component removal/replacement and

re-work.
4---The Workstation has a 80 X120mm a 600W controlled Pre-heating System.
5--- Infrared heat source bulbs are long-lived, in-expensive and easily replaced.
6--- Processor controlled set-point regulated temperatures with thermocouple feed-back.
7---Integrated and adjustable Infrared (IR) eye protection.
8---Can suitable for the entire component, especially Micro BGA component.
9---The T-862 system also contains a temperature controlled touch-up iron and stand.
10--- Extra soldering tools are not necessary to solder/unsolder and re-work Surface

Mount Technology (SMT) components18*18cm in size
11---Training is illustrated in factory provided video

12---Fast shipping .Can ship fromUSA,GBR,GER.

Technic parameter

Work bench size	410x316mm
Working Voltage	AC110V/60Hz / AC220V/50Hz
Output power	600W
Infra-red lamp body temperature adjustable	100°C-350°C
Preheating plate size	280x270mm
Preheating dish temperature adjustable	60°C-200°C

Instrument inventory

T-862 Chassis	1
PCB Board holder	1
936 Searing-iron	1
936 searing-iron rack	1
Lamp Body and Lens(D=28mm)	1
Eye protection(IR Filter)	1
Cell guide	1
Focus holder Focus holder	1
Focus holder control knob	1
Fasten nut for focus holder	1
Steady ring	1
Fasten nut for steady ring	1
Power Cable (110VAC or 200VAC)	1
5mm Fuse, 10A 250VAC (Spare)	1
CD User Manual w/Video	1
Detailed English instructions and illustrations	1

Maintenance

♥At all times – Insure the light body cooling fan is unobstructed and clean.

♥Use a little machine oil. Lubricate the focus holder and cell guide to inhibit rusting, keep them ease to operate.

Warning

♦The T862 System creates temperatures in excess of high degrees via Infrared Light. Wear appropriate eye protection or any device within

♦The T862 system when using this machine. After use, Do not cut the power immediately, confirm the light body is cool-to-touch, Turn off the power switch, then place the system in airiness & safety storage.
♦Do NOT use this system or any associated device in an environment conducive to fire or electrical overload.

♦Disconnect the AC Power Plug when not in use.