Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Flash Drying Equipment

sawdust dryer, 1. Fast drying effect, 2. Dry sawdust,rice husk,powder like materials, 3. From 40%~45% to 8%~12%, 4. 300~2500kg/h - details see: https://www.machineto.com/2013-hot-selling-wood-sawdust-dryer-manufacturer-10290173

2013 Wood Sawdust Dryer Manufacturer

Introduction of sawdust dryer

It issuitable for dryingsensitive material likesawdust,rice hull,milledwheat straw,milled cotton/corn stalksand so on.It is made up of heat stove, tube, impulse jar, function tube, fan, andcycloneseparator.It can reduce moisture from40-45%to8-12%.

Fuel for the furnace: wood waste, coal. Waste oil and so on.

Regarding HGJ-I and HGJ-II Type Dryer, it is suitable to process materials which moisture content between 20%-25%.It can reduce the MS to 8%-12% one drying time.

Regarding HGJ- III it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel

It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintainace, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.

(Note:If the moisture of raw materials is more than 45%, the furnace required the bigger, please inform us when ordering.)

Working Principle of sawdust dryer:

Wet material is input into the hopper. The stove generates hot air, hot air mixed with wet sawdust and then sucked into

the pipes by the exhaust blower , flowing and go though thecurving pipes and (drying chamber) of dryer, thus the wet

sawdust is dried, and the dried sawdust is dischargedfrom the outlet with air lock.

Technical parameter of sawdust dryer:

Model	HGJ-I	HGJ-II	HGJ-III
Capacity-kg/h	300-400	400-500	800-1000
Diameter of raw-mm	< 3mm & < 5mm	< 3mm & < 5mm	< 3mm & < 5mm
Air temperature-°C	180°C~250°C	180°C~250°C	180°C~250°C
Centrifugal power-Airlock power kw	4	5.5	7.5
Material in feed	20mm	20mm	20mm
Consumption-kg/h	10kg/h	20kg/h	25-30kg/h
Weight/kg	2000	3000	4500
Dimension-meter	20*0.85*2.2m	30*0.85*2.5	50*0.95*2.7
Moisture-max-°C	35-45	35-45	35-45
Dried-max-°C	8-12	8-12	3-10