Spin Flash Drying Equipment

Spin Flash Drying Equipment:, 1)5-10s drying time, 2)heat source:steam exchange, fuel gas,oil or coal,etc., 3)negative operation - details see: https://www.machineto.com/spin-flash-drying-equipment-10290007
Type:Flash Drying EquipmentPlace of Origin:Jiangsu China (Mainland)Brand Name:FUYIModel Number:XSG
Spin Flash Drying Equipment:Flash Drying   
Spin Flash Drying Equipment
contact supplier for Spin Flash Drying Equipment


Spin Flash Dryng Equipment:

Drying sticky materials
The cone structure in the dryer, washing out of the air flow to the wall and the structure of the agitator determines it can deal with certain sticky materials.
Drying thermo-sensitive materials
As the drying time is short, the relative speed between the materials and the hot air is big, and the hottest air does not contact the dried materials directly, it is suitable to treat the thermo-sensitive materials.
The drying intensity is high.
As the materials are smashed, washed out and impacted, its surface area increases and the drying is strengthened; At the same time, as the hottest air does not contact the dried material directly, the entering air temperature can be made higher than the melting point of the materials, therefore, the drying intensity of the equipment is high
Efficiently control the final moisture and fineness
The final moisture and the fineness of the finished product is effectively controlled by the internal devices equipped in the drying tower (swirl-flow flake, elutriate ring or grader) , and the coordination with the temperatures of the entering and discharging air.
Environment meets the standards.
The system eliminates the operation environment pollution under the negative pressure in the operation and it adopts different dust removing mode and materials according to the different raw materials (pulse bag dust catcher, water shower duster, Venturi damp dust remover and so on).
Low labor intensity
The feeder and the discharger are made in different forms according to the difference of the materials so as to reach automatically continuously feeding and discharging aims.
The best power matching
The blower, the draught fan, the agitator and the feeder and so on are furnished with the best power according to the different nature of the materials (density, bulk density, viscosity, fineness, primary moisture, final moisture, angle of repose and so on).

Technical parameters

Type
Inner diam. ofthe main machine(mm)
Air quantity
m3/h
Moisture evaporation
kg/h
Installed capacity
kw
Max. height
m
Floor area
m2
XSG-2
200
350-500
12-17
6-10
3.5
10
XSG-4
400
1150-2000
40-70
12-18
4.2
18
XSG-6
600
2450-4500
80-150
20-25
5.2
25
XSG-8
800
4500-7550
150-250
27-32
5.6
32
XSG-10
1000
7000-12500
230-420
40-47
6.2
38
XSG-12
1200
10000-18000
300-600
50-65
7.0
45
XSG-14
1400
13500-23500
450-750
60-72
7.4
55
XSG-16
1600
18000-32000
600-1200
70-90
8.0
75

Notice
1.)Moisture evaporation volume is the maximum moisture evaporation volume measured when the entering air temperature is 180 and discharging air temperature is 80;
2.)The max height and floor coverage will be laid according to the actual conditions, the data in the table is only for reference.

Spin Flash Drying Equipment
Packaging Detail:wooden case
Delivery Detail:50 days

Related Product for Spin Flash Drying Equipment


Warning: Cannot modify header information - headers already sent by (output started at /home/machineto/machineto.com/sys/db_mysqli.php:1) in /home/machineto/machineto.com/app/ctrl/productCtrl.php on line 208