Water Bottle Group Wrapping Packing Machine
Working flow instruction
n Conveying the bottles: When the bottles go in to the convey groove and arrive to the setted position, bottles will be stopped conveying.
n push the bottles: When the bottles go to the pushing table, the pushing cylinder will push the bottles over the sealing level.
n bottles covered by PE film and sealed: The pressing device press the bottles, which are over the sealing level, then bottles be covered by the covering cylinder, and sealed by the sealing cylinder.
n shrinking: the covered and sealed bottles goes into the shrink tunnel for shrinking.
n cooling: the shrinker bottles group goes into the conveyor after the shrinking tunnel for cooling.
Features
n the film cover and seal adopts hot cutting st-ruction, it is stable in sealing.
n The cutting host is pushed by cylinder, running is stable.
n It has protection function, if there is barrier in cutting cross, the machine will alarm.
n The heating elements is made from advance stainless steel, it makes even heating
n It equips with PID thermometer
n With PLC and touch screen
Technology parameters
| Name | Spec |
| Power | 380V 50HZ, three phase 5 wire |
| Power | 28kw |
| Air source | 0.6Mpa, 25m3/H |
| Packing speed | 12-16 packs per minute |
| Packing material | PE |
| Machine material | Carbon steel or stainless steel |
| Size | 10000×1200×1900mm |
Any further info for Water Bottle Group Wrapping Packing Machine , pls cntact me