Automatic High Speed Line Type PE Film Shrink Wrapping Machine

linear stype hot shrinking film packing machine

A The process of packing

Back feeding→front feeding→botttle split machine →deflector rod machine →mantle sealing→shrinking→cooling →store

1,back feeding:It is connected to the production line ,when the goods come into the back feeding groove,there is no adjustable barrier.

2,front feeding:After the front feeding, the packed goods send the ordered packed goods to the bottle split machine

3,the split machine :This machine is made according to the requirement, it has novel structure,high efficient.

4,deflector rod machine :It puts the goods in order when this machine is working, then send the packed goods through selaingand cutting line.

5,the mantle sealing:The packed goods will be pressed by the top swage device inorder to avoiddumpage, then finish the film ,sealing automaticlly

6shrinking:After the mantle,the packed goods come into the shrinking oven then finish shrinking.

7,cooling:After shrinking ,this machine will cool the pached goods in the end of the machine .

8,Store:the packed goods come into the auxiliary frame ,be ready to pallet.

B The characteristic of the equipment .

1,The mantle sealing machine uses hot sealing and hot cutting,the sealing is fast,the edge is tidy and with good sealing performance.This structure will need less electricity .

2,The main body of the sealing cutting uses cylinder ,there arepillars on both sides .

3,special protection function,when there is some obstruct at the sealing cutting ,the equipment will be protected ,at the same time ,the alarm will ring,it can prevent the packed goods from been damaged .

4,the convey groove adopts plastic steel chain net form, use for long ,it can not metamorphose,the convey is satble.

5,subletting machine ,it is accurate,stable,it is convient to adjust.

6,the heat part uses stainless steel heating tape cooling fin,the heat energy exhale steadily,this machine can be used for long terms.

7,there is PID temperature controller.

8,The shrinking machine adopts the hot wind diversion kerb cycle system,the airflow can be adjustable ,the heat energy can be reclaimed automaticly

9,Special preserve heat structure,It can both save the energy,with the security operation.

10,The production process will be steady by the automatically controlling system.It can work for many hours and do not need to have a rest .

C Parameter

1,suitable electrical source: 50Hz/380V,three phase ,five wire stype

2,Power: prox28KW.

3,Working air pressure:dry air ≥0.6MPa,air consumption:25m3/H.

4,the packing speed :20-25bag/minute.

5,the suitable bottle material :glass bottle,pop can,PET and heat-resistance temperature 200°Cand the other material.

6,suitable bottle diameter :Φ60-90Φmm,height≤330mm.

7,the packing material : PE hot shrinking film,thickness: 0.03-0.10mm ,the max width of film : 600mm

8,the weight of whole machine:1.5ton