Home  >  Industrial Supplies  >  Machine Oil Purifier

1)Oil filtation machine, 2)Dehydrating and degassing, 3)Precise filtration, 4)Single stage, 5)ISO9001 &TUV Rheinlad - details see: https://www.machineto.com/oil-recycling-machine-can-make-oil-used-repeatedly-10228256

Oil recycling machine can make oil used repeatedly

Why do we choose oil purifier?

After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration , transformer oil will oxidize and lose its original property and
cannot be used effectively again. So Wanmei oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression
oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; so as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses.

General Description

ZL high efficiency vacuum oil purifier is the special equipment to purify the unqualified electric insulating oil of electric power department and factories, mines and other enterprises. Besides, it is the ideal equipment to dry electric
equipment, and of adding oil to electric power equipment in vacuum condition (transformer, condenser).
ZLQ automatic computerized high efficiency vacuum oil purifier and ZLZ high efficiency intelligent testing vacuum oil purifier have all the functions of ZL series, and they are fit for special condition. It can be applied for purifier of
unqualified transformer oil, mutual inductor oil, switch oil and capacitor oil as well as low-viscosity lubricating oil.

Characteristic:
1. Unique, high efficiency dehydration and degassing system, large-area three-dimension flash steaming technology to separate water, gas from oil quickly.

2. Safe electric heating system guarantees the even heating and stable oil temperature.

3. Precise multi-stage filtration system: big capacity of containing pollutant, good mechanic strength

4. Advanced pressure protection device and infrared liquid level control system

5. Chain control system of draining off water and gas exhaust. Extra oil spilling out of vacuum pump can be prevented, which will greatly prolong the life of vacuum pump.

6. This machine can be used with BZ series transformer oil regenerating machine to add functions of deacidifying, decoloring, free carbon removal, medium loss reducing.

Description of work flow:
The oil enters the first stage magnetic filter through the atmosphere pressure and the vacuum pump, and the larger impurities including the metal particles were removed. The oil through the heater entering the secondary filter and the
thin impurity was removed and then entering the vacuum flash evaporating tower. Because of separation of oil & water device adopted the technology of lipophilic oil and estrangement water, improved the reciprocity between the oil and
water, make the thin impurity accelerate sport in the oil, deposit at the water implement. Through the spray system, the oil poured on the flash pall ring and produces a large of gas area and a long stopping time, gained the sufficient
oil and water separation, remove the thin water and gas. The vapor is removed through the drainage valve and the gas was removed by the vacuum pump. The oil is removed the water, gas and the machine impurity through the secondary-stage
and third-stage that is cleanliness oil and finish the whole course.

Maintenance

A. check and adjust after oil purifier works for a period of time
1. all the electric control apparatus
2. temperature controller
3. oil seals and motor couplings
4. clean filter elements, check pumps and motors
5. all the pipes for leaking
B. Clean the motor and change the lubricating grease
C. Check and add specified lubricating oil to vacuum pump,
D. If oil purifier is not in use for one month or more, put it on a dry, flat ground, close all valves and electric cabinet, cove the whole machine with canvas.

The result of purified oil and before.

Caertificates

We got ISO9001, certified by TUV Rheinland and got 6 patents.

Our office and factory

Our office is Bright and spacious and the factory is clean and tidy, welcome to visit us and have business negotiation here!

Our Products

Wanmei has developed 32 series and 280 different models of products, based on the latest scientific research and advanced technology both in China and abroad. All these products are working properly in different industries of electrical generation, petroleum, chemistry, metallurgy, machinery, mining, aviation, ship-building, railway transportation, etc.

Our Clients

Wanmei has already cooperated with our domestic and overseas customers since 2001. More and more clients select our oil purifier as their products identification. Hope one day your logo can be put here!

Package & Delivery

Normally, we pack our machine with wooden cases. If you have special requirements, please mention that in advance. The main packing method:
Wooden case with waterproofing felt in side for airplane transportation & ocean transport.

Return & Feedback
We can provide the main component for each marking machine. You can send back the unqualified spare parts to maintenance or replacement the new spare parts for your marker.

After-sales Services

One year guarantee for product quality. (People damaged parts are charged).
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.
Free training for machines installation and operation of the staffs.

Contact Information
If you have any idea, please do not hesitate to contact us! We will always support you!