MF-F2436-4TL Glass tempering furnace machine

Glass tempering furnace machine MF-F2436-4TL

SPECIFICATINS

I. Technical Performance

1. Maximum area of glass sheets array: 4MM-19MM 2440MM×3660MM

Minimum size of glass for processing: 100MM × 250MM or φ250MM

2. Thickness of glass for processing: 4 - 19 mm

3. Maximum area of glass for processing: 8.6 square meters per tempering cycle

8.9 square meters per glass sheet

4. Production Rate: high-quality float flat glass specified by GB11614-1999, four-side edges ground. No holes or chamfer are allowed.

Note: The productivity may be reduced by 10-30% in the following cases:

1. When the length of an individual piece of glass exceeds 3050mm;
2. For low-E glass; and
3. For glasses of other special size, processing requirement or performance
4. Yield Rate: 97%
5. Glass Varieties to be Produced: Ordinary glass, pattern glass, reflective glass, color glazed glass and coated Low-E (Radiance Value: e≥0.06) glass
6. Energy Consumption: For 5mm flat glass sheets that are to be tempered and whose occupation rate inside the hearth is above 75%, the energy consumption per square meter is equal to or less than 4kw.h.

II. Main Technical Parameters

1. Equipment External Dimension: 18075mm(L)×6950mm(W)×3500mm(H) (the fanning mill is set after the machine)

2. Installed Capacity:

Power Supply: Three-phase 380V; Five-wire 50 Hz

Gross Power: 870KW

Picture

parts of machine

part of control system

products