ZCC.CT Fresas de Metal Duro topo reto - 4 cortes
| Place of Origin:Hunan China (Mainland) | Brand Name:ZCC.CT | Model Number:GM-4E-D4.0 | Material:Carbide |
| Diameter:3.5MM | Type:End Mill | Coating:TiAIN | Overall Length:50mm |
| HRC:50 | MOQ:10 | Flutes:4 | spiral angle:45 degree |
| D range:0.02 | diamter of handle:6.0mm | cutting lenght:11mm |
GM-4E
1. Product features introduced:
NAME: 4-flute flattened end mills with straight shank
APPLICATION: For side milling and shallow slot machining. Wide application.
Range of application: Side face, Step shoulder, Straight slot.
Item: 35 degree spiral angle, TiAIN coated, D range: D≤12 0~-0.020 12<D 0~-0.030.
2. Applicable material:
Carbon steel, Alloy steel, Pre-hardened steel(~40HRC ~50HRC),Hardened steel (~40HRC ~50HRC), Stainless steel, Cast iron, Nodular, cast iron, Titanium alloy, Heat resistant
3. Product introduction to the overall:
GM series general machining end mills:
Wide application: high efficiency machining can be achieved from
common steel to pre-Hardened steel.
Optimized structure: reasonable combination of sharp cutting
edge and tool strength makes cutting much light and fast, achieving
longer tool-life.
Complete in category: can realize application from rough
machining with high metal removal rate to finish machining with high
surface quality.
Complete in specification: the minimum specification is 0.3 mm,
easily complete machining even though the micro part of workpiece.
| Packaging Detail:one end mill per a plastic box. |
| Delivery Detail:3-15 days |
Related Product for ZCC.CT Fresas de Metal Duro topo reto - 4 cortes
Production and sales milling cutters
milling cutters:Production equipment: Switzerland ROLLOMATIC
Coating: DIA
Graphite special
Tungsten dovetail milling cutter
1,end mill HRC452,carbide milling tools
3,Tungsten dovetail milling cutter
4,WC=88%, Co=12%
5,Solid carbide end mills
Solid Carbide V Bit
1. Application: Precision 3D engraving on Acrylic,PVC,MDF,Aluminum etc.2.Material:tungsten
3.V bit degree:45 to 150 degree
Down cut one flute spriral bits for wood cutting
1. Designed for cutting MDF, Soft wood etc.2. Antispin, chip removel downward.
3. material: solid carbide.
Tungsten Carbide Ball Nose End Mill 2/3/4/6 Flutes
Tungsten Carbide Ball Nose End Mill 2/3/4/6 Flutes1) SGS centification and ISO9001
2) Tialn and AS , Altin Coated
Micro diameter ball nose milling cutter/ micro end mill
SENYO- Micro-diameter ball nose milling cutter1: Micro-dia type end mill
2: cutting dia from R0.15-0.5mm
2: High quality
2/3 Flutes Aluminum Carbide End Milling Cutting Tools /Milling Tools
2/3 Flutes Aluminum Carbide End Milling Cutting Tools/Milling Tools1.Pass SGS and ISO9001
2.Competitive price good quality
SSB200 CBN precision high speed cutting tool for finishing
Precision high speed cutting tool has realized both advantages of CBN and Carbide for mirror finishing.
MSXH440R 4 flutes unequal helix precision end mill for Titanium milling
Inheritance of POWER Series-High efficiency Titanium milling! Dynamic Unequal Helix 4 flutes End Mill
Hss Square Type End Mill
Hss Square Type End Mill1.Material:Cobalt 8% steel or M42
2.Workpiece:Below HRC38
3.2/3/4/5/6 Flute
Carbid AlloySteel Endmill Mills/ Wave Blade Milling Cutters
+Scraps discharge unobstructed+Surface finish high
+,Carbide Roughing End Mills
+Good quality,competitive price
+Co 12%
3D engraving bits(Double Flutes 3D Engraving bits)
1. Application: 3D engraving and chamfer angle on Acrylic,MDF etc.2. Material: solid carbide.
3. Angle: 90-150 degrees