Home  >  Other Machinery  >  Other Machinery & Industry Equipment

IC card personalization, 1.Writing the sequential requirement data, 2 Engravethe card body with two laser units - details see: https://www.machineto.com/ylg-e-smart-card-personalized-data-writer-10360165

IC data loader

For watching the video clip of this machine, please visit our official website:

http://www.tj-lk.cn

http://www.tj-lk.cn/cpinfo.asp?id=529

Smart card personalized data writer YLG-E is applicable for writing the sequentialrequirement data such as smart card personalized data on both 2-chip card and 1-chip card, and it can also mark or engrave the card body with two laser units. The equipment is developed with module design.

Basic Configuration

1. 32 programming stations (YLD-A1.0 Reader);

2. YL Intelligence control system;

3. Double input and output Magazines 4*500 ;

4. 1 defective Card Station;

5. 1 flip before Laser Marking Station;

6. 1 Turning pan with 6 buffers for Re-arrangement (for re-writing cards );

7. 2 sets of laser units with cooling system and air clean system

8. 2 Industry Computers (motion control and Data control)

9. 1 TPLINK (24 interface).

Speed and downloading time (for 2-chip card)

X axis is time,Y axis is speed,the time at inflexion is 8.8s. when the downloading time is 24.8s,the speed is 2000 cards/h.

Speed and laser marking time (for 2-chip card)

X axis is time,Y axis is speed,the time at inflexion is 0.4s,when the marking time is 1.6s,the speed is over 1800 cards/h.

Technical parameters:

Device Dimension(L×W×H: 3.45m×1.0m×1.75m

Weight: about 800kg

Power supply: 220V(-5%~+10%),50Hz

3Kw(Main Device),3.6Kw(Laser)

Power duty: About 30%;

Air supply 0.5Mpa 10L/min