Home  >  Packaging Machinery  >  Laminating Machines

high speed, full automatic laminating and D-laminating machine for transfer paper and film - details see: https://www.machineto.com/yiming-high-speed-transfer-paper-laminating-machine-10058589

HIGH SPEED TRANSFER PAPER LAMINATING MACHINE

Design Principles of YM-FTB-1600A

The frame construction is a precision-engineered that enables to meet the high requirement on holographic transfer paper or cardboard, including one special designed three rollers reverse coating unit for backside coating on paper or cardboard, Lamination paper with film and one D-lamination unit for transferring holographic image from film to paper. High accuracy coating method can reach different coating condition. Main drivers controlled by automatic controller with close loop tension control through PLC. Main operation information is shown on touch screens and in-line measurement is easy to be operated due to actual production. Two un-winder system, including one for holographic film and one for paper or cardboard, two re-winder system, including one for film and one for paper or cardboard.

Specification:

Coating Material: Holographic metalized PET Film: 12~30mic,

Metalized PET Film: 12~30mic

Metalized BOPP film: 20~40mic

Paper: 50~ 350g/sqm

Backing coating chemical Water base

Backing coating method Gravure doctor blade coating

Lamination method Three roller reverse glue coating + D lamination unit

Max Material width: 1600 mm

Max Machine Speed: 180 m/min

Max Coating Speed: 12~30μm PET Film : 170m/min

Paper : 150m/min

Max un-winder and re-winder O.D for paper: un-winder: 1600mm

Max un-winder and re-winder OD for film: 800mm

Tension Control: 3~300N/ web

Power: 400kW

Frame Size: L: 16000mm, W:3500mm, H:4300mm

Weight: 35 ton

Web way: From left to right

ANNEXURE-2 –Performance Test-part of Contract

The performance test will be conducted at the Seller’s premises in Shantou and thereafter at the Buyer’s plant.

1. No load test run and supported film test run (implement in the Supplier’s factory):

A.) Mechanical speed-0- 180 M/minute

B.) Working speed-0- 170 M/minute

C.) Trial run working time- 8 hours continuous

2. Acceptance Level:

A.) Vibration free smooth movement

B.) No abnormal noise, start/stop the machine, increase/decrease the speed

C.) All guide roll run smoothly

D.) Without trouble auto stopping phenomena

E.) Excellent tension control

F.) Rewounded roll should be as uniform as unwounded roll.

G.) Temperature variation on the shim roll should be within the range of +/- 3 Degree C across the width and circumference. The same should be maintained during the full working.

3. Equipment trial working (implement in the Buyer’s factory)

A.) All the above

B.) The trial production will be for 3 days. The Seller’s team will stay at Buyer’s factory and provide all the above results mentioned item no.-2 for continuous 3 working days.