XFD laboratory flotation machine

XFD Flotation Machine, 1.high quality, 2.precision manufacturing, 3.applied on laboratory flotating, 3.easy operation - details see: http://www.machineto.com/xfd-laboratory-flotation-machine-10315458
Condition:NewType:Flotation SeparatorProduction Capacity:0.5L-8LPlace of Origin:Jiangxi China (Mainland)
Brand Name:southern mining machineryModel Number:XFD flotation separatorVoltage:220VPower(W):90-250kw
Weight:30-71kgCertification:ISO9001:2008Warranty:1 yearAfter-sales Service Provided:Engineers available to service machinery overseas
colour:as per clientsUsage:mineral testingApplication:college, research institutions, small mining factory 
XFD laboratory flotation machine
contact supplier for XFD laboratory flotation machine


Detailed Description of XFD laboratory flotation machine

XFD laboratory flotation machine

1. High quality,precision manufacturing

2. It is applied on laboratory flotating

3. 39- liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to 10.

4. It is left-type or right-type according to user’s demand.

Structure and features of XFD laboratory flotation machine

Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts:

(1). Tank of XFD laboratory flotation machine

The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp.

In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate.

Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning.

The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process.

(2)Impeller system of XFD laboratory flotation machine

Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately.

The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19.

(3) Shaving foam device of XFD laboratory flotation machine

Foam is scraped using the rotary scraper along the flotation machine. The scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt.

Technical parameters of XFD laboratory flotation machine

(1)Tank size: L×W×H 315×315mm×527mm

(2)The effective volume: 39 liters

(3)The flow of the pulp is calculated according to the production capacity

(4)Aeration rate: 35-45 liters / min

(5)Impeller diameter:200mm

(6)Impeller speed: 809m/s

(7)Impeller circumferential speed:8.14m/s

(8)Scraper rpm: big wheel/small wheel 21r/min /13r/min

(9)Motor: Model y900l-4 voltage :220/380V

Power:1.5KW rpm: 1400 r / min

(10)Assembly method: Left-style

(11)The outline size of machine: H: 930mm, W: 762mm, L (including 2 slots)1081mm

(12)Total weight:(including 2 slot motors)

Lab Single flotation:

Cluster Series single slot-machine flotation, the company is development of the new generation products. The product design is reasonable, simple operation.

It is very easy to use and maintenance, visual effects, accurate measurement in the geology, metallurgy, building materials, chemical industrial laboratory.

Kind of a ideal flotation devices for small amount of ore . The product line speed and a CVT impeller speed advantages can be shown.

specification of XFD laboratory flotation machine

ModelVolume of tankImpeller diameteImpeller speedScraper speedPowerOverall dimensionsWeight
Granularity for 0.2 mmLmmr/minr/minwmmkg
XFD0.5L1.5452130-259015/3090635/338/70030
XFD0.75L0.75452130-259015/3090635/338/70030
XFD1L1551700-210015/3090635/338/70030
XFD1.5L1.5601590-191015/3090635/338/70033
XFD3L3701544-18908/20120683/350/82250
XFD8L810014008.6/13/17250740/350/86771

Packaging Detail:EXPORT STANDARD OF LAB FLOTATION MACHINE
Delivery Detail:WITHIN 30 DAYS AFTER RECEIVING 30% DEPOSITS OR ORIGINAL L/C

Related Product for XFD laboratory flotation machine