Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

1.With ISO9001., 2.With high safty, 3. Without pollution., 4. Energy saving., 5. Use more than 10 years. - details see: https://www.machineto.com/waste-oil-regeneration-and-refining-machine-10340702

Technical features:

1.the purifier uses a physiochemical reaction to eliminate the electric charge between polar particulate in waste oil, which is gathered into large particles and separated. The colloid, bitumen and other compound in oil are also removed while harmful gas and the filtration and the vacuum dewatering function of waste gas cleaner remove water content. Thus, the oil is cleaned and the effective constituent of oil is retained.

2.High precision stainless steel net is used, which is anti-corrosive, high temperature resistant and has a good mechanical strength and long lifetime. It is easy-to-use, and utilizes the economical pressure filter as filter medium.

Treatment of the residues

There are normally 3 kind of residues-exhausted gas, water liquid, waste solid,

2. Waste liquid - Faintly acid waste water will be produced in the process of treatment of oil products, after neutralization by adding faintly alkaline liquor, the neutral waste water shall be harmless to three- grade filtration and can be discharged into special evaporation processor to vapor.

2. Exhaust gas - By the means of full combustion in water seal and gas burner, the pollution of exhaust gas shall be eliminated and a large amount of fuel shall be saved. Also dust collector will be used to discharge the smoke and dust, and the discharge of the smoke and dust meets the related standards in 2001.

3. Waste solid - the solid left is carbon black, no solid waste left.

Installation

Due to its steel frame structure, its installation is very convenient and swift. All you need is to put every system in the designated location according to the direction of the technician, firmly fix them and connect them by pipes. Then you can try this plant.

Safety:

1. Our factory uses auto welding machine for the reactor, which can improve the working efficiency and guarantee the quality of welding lines, so that can avoid explosion caused by gas leak.

2. Professional testing for the reactor before sending from factory, which can garantee the safety of the plant.

3. Our plant includes professional thermometer, pressure gauge and safety valve to make sure the safety.

4. We have special design for dealing with the exhaust gas(C1 to C4), during our process, it is safety burned through the special designed device.

1