Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Truck

1.high efficiency, 2.durable and quality warranty - details see: https://www.machineto.com/tsb-2a-rail-line-concrete-mixer-truck-10094348

TS Series rail line type concrete mixing truck, used to transport concrete from the mixing plant to the construction site.Transport in drifting, use battery traction, plus insurance after installation, can slope no greater than 18 degrees inclined heavy vehicles decentralization, empty uphill transport, the need for traction winch.Vehicle throughput TS-4 type is 4m3 (cable car at least 8 tons or more); TS-6 type is 6m3 (at least more than 12 tons of cable car), only Lane loading, unloading.Loading and unloading materials, the mixing tube by the motor drive for positive and negative direction of rotation, are transferred mixing or feed, reverse the material, walking on the way to avoid concrete segregation, when the vehicle is powered by the wheels came towards Mixing Drum Mixingfor one-way direction of rotation (according to the direction of the corresponding shift), uniform mixing.The car set a clutch chain protection device, when used for transporting trucks passing, combined with manual clutch, electric motor can not start to protect the motor.When manual clutch disengaged, the motor can be connected to decorative work, need to use water to clean each tank after discharge tube.
Mixing tube Flashlight tilt cylinder fitted with computer optimized design double helix leaves, mixing even made a clean discharge.
Mine explosion-proof design of the transport vehicle, with coal for the railway tunnel, defense engineering, hydraulic culvert, underground mines and other Drift (delegated by inclined) of concrete mixing equipment.At the same time there are explosion-proof type.

Model parameter		Unit
Product model			TSB-2	TSB-4	TSB-6	TS6G	TSB-8	TSB-2A(Low -like)
Agitation tube capacity		M3	3.2	5.2	9	9.5	12	2.7
Transportation capacity		M3	2	4	6	6	8	1.8
Ex-denning speed		M3/min	0.5~0.86	0.5~0.86	0.5~0.86	0.5~0.86	0.5~0.86	0.5~0.86
Agitation tube rotational speed	Ex-denning/agitation	r/min	11.7	10~0.8	12.3~0.8	8~8	10~0.8	11.7
	Walks when	r/min	2.48(10km/h)	0.8(10km/h)	0.8(10km/h)	2(10km/h)	0.8(10km/h)	2.48(10km/h)
Gauge		mm	600/762/900	600/762/900	600/762/900	762/900	600/762/900	600/762/900
Isotropil curve radius		m	15	20	20	20	20	12
Biggest release sub-branch slope		(°)	18	18	18	18	18	18
Enters when the ex-denning track grade		‰	6	6	6	6	6	6
Maximum running speed		km/h	10	15	15	10	15	10
Through curve, crossing vehicle speed		km/h	3	3	3	3	3	3
Hauling joint way	Uses in evenly dark green	Draw link
	Uses in the slant hole	A hauling links up, two safe suspension hooks
Remnant rate			≤5%	≤5%	≤5%	≤5%	≤5%	≤5%
External dimensions (long * wide * high)		mm	5061×1400×1961(Gauge 262)	6000×1500×2213	7082×1650×2637	6610×1600×2800	8000×1600×3200	4522×1400×1850(Gauge 600/762)
			5061×1538×1971(Gauge 900)					4522×1538×1850(Gauge 900)
Dead weight		T	4.7(Gauge 600/762)	6.9	9	9.6	11	4.1(Gauge 600/762)
			4.8(Gauge 900)					4.2(Gauge 900)
Discharge port altitude		mm	1350	1440	1450	1430	1500	1170
Feed head altitude		mm	1964	2160	2585	2740	3000	1800
Feeds half size		mm	630×686	630×686	630×800	710×870	630×800	595×750
Spread of axies		mm	1953	2850	3200	2600	3200	1350
Mixing blade		Logarithm double helix leaf blade