TRT Thin Oil Lubrication Station

1.TRT series thin oil lubrication station, 2.Equipped with two pumps, 3.With magnegtic oil return filter - details see: https://www.machineto.com/trt-thin-oil-lubrication-station-10160168

Place of Origin:Sichuan China (Mainland)	Brand Name:CRUN	Model Number:TRT	Type:Welding Parts,Lubrication Station
Material:Stainless steel	Certification:Other

Purpose

TRT series thin oil lubrication station is mainly applied to the thin oil lubrication system of the equipments in steel industry and metallurgy, which supplies lubrication oil for the blower, reducer and motor bearings, major pump of Turbine.

Operation Principle

The equipment is composed of oil tank, oil pump, oil cooler, valves, filter, pipes and instrument panel and so on. Equipped with two main pumps, one works and the other is for spare.

Not need to stop machine while changing and cleaning filtering mesh for use of duplex tank mesh filter. And it will automatically alarm when the mesh is blocked.

-Magnetic oil return filter can absorb 99% magnetic material.

The pressure reducing valve of oil supply system can insure constant pressure when changing of low.

There is a manhole on the oil tank which is convenient to check and clean.

There are level sensor, oil leveler, electrical contacts and bimetal thermometer, air purifier, sampling valves, oil drainage valve an so on.

Thin oil lubrication equipment, electrical control panel and instrument panel are interlocked with center control of the host machine. Therefore, full automatic operation management without man can be achieved.

Oil is drawn out by oil pump from oil tank and goes through shut-off valve, filter, oil cooler, duplex tank mesh filter, then directly sent to lubrication points and the main turbine pump. The oil pressure is adjusted by an oil pressure adjusting valve according to the requirements of the lubrication points. When the working pressure exceeds the regulated pressure, the oil pressure adjusting valve will open automatically, and the overflowed oil will flow back into the oil tank.

Ambient Conditions:

Elevation: ≤1,000 meters

Power: Three-phase four-wire system AC380V/220V

Fluctuations≤10%;50Hz, Fluctuations≤1%

Ambient Temperature: (0-40)°C (Humidity: 60%-90%)

No vibration, corrosive gas, fire, explosion, and non-outdoor service

Performance Parameter Data

Company profile

Sichuan CRUN Co., Ltd is located in Chengdu, Sichuan province, was established in 1992,

was listed on Shenzhen Stock Exchange on Sept.19, 2008.

Ranking the FIRST listing company in lubrication industry of China (stock code: 002272) .

Ranking the BIGGEST lubrication equipment production capability in China.