TH-2004L1-1X Rotary Robot for dispensing circular beads with pick and place

rotary tables are used for semi-automatic dispensing applications of rotary parts. Tables can be programmed for auto cycling allowing the operator to remove and place new parts for dispensing. Programming features compensate for fluid flow delays and for dispensing greater or less than 360 degrees.

Sales Points/Focus

1. Can requires you to setting time before the delay and after the delay, dispensing time, motor speed, even on the glue, non-contact trace

2. Use imported Slide cylinder, so the machine run will be quick and stable, to avoid the mechanical movement error

3. A unique universal adjustment of frame, and equipped with precision micrometer fine-tuning device, can be fast and accurate adjustment of the work piece with dispensing head range 4. Use precision stepper motor, so that the process of dispensing uniform strips 5. Based on the product, process requirements can be flexible with any of a T&H Dispenser and other assistive

Specification
Standard: CE Approved

Drive: Precision step motor

Adjusting way: universal adjustment of frame

Max ID : ¢200

Motor speed: 10~300 Cycles/minute

Repeatability: ±0.01mm

Frequency: >100time/munite

Dispensing time:0.01-9.99sec
Input Air pressure 1-7 bar (100 psi) maximum

Output voltage: 0.1bar-7bar
Input voltage: 110 VAC or 220 VAC
Internal Voltage: 24 VDC Weight: 10Kg
Size 42 x 49x 52(cm)

Operating Conditions:

Temperature: 5°C to 45°C (41°F-113°F)

Humidity: 85% RH at 30°C non-condensing

Complete accessories dispensing kit

Quality gurantee

We provide1years warranty of product and shipment with one set fitting to you

Standard packing box

Factory Picture

Related Products

Rotary tablemachine for dispensing bead on circular product