Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Textile Finishing Machines

Our stenter is mainly used for the cotton,polyester,wool,hemp of setting process of the open width fabrics. - details see: https://www.machineto.com/textile-stenter-10278528

Usage of the machine:

YXLD2800hot air stenter is mainly used for the cotton,polyester,wool,hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics and good hand feeling.

Mainly technical parameters:

Machine working pattern : chains circulation horizontal rotary

Heat setting pattern : hot air circulation

Chains pattern: pitch 60mm,pin and clamp two optional.

Rail pattern stainless steel rail,non oil lubrication

Machine standard power: 380V(±5%)50Hz3PH

Control power: 220V,24V

Applicable steam specification: 3-6Kg/cm²saturated steam

Steam consumption : 100~150kg/hour

Applicable compressed air specification:0.3-0.6Mpa compressed air without moisture

Maximum temperature of the heating chamber: 220°C

Applicable heat source :Circulation thermal oil

Circulation oil consumption:80000-140000Kcal/ H·chamber(0.33-0.6GJ)

Main chain driven pattern: right and left chains drive separately

Working width control pattern: working width of each chamber adjust separately

Air delivery pattern of the heating chamber: upper blower chamber and lower blower chamber control air volume seperately.

Pin plate maximum working width:2400mm

Heating chamber width: 3000mm/chamber

Heating chamber thickness:150mm

Machincial speed : 5~80m/min

Power of some parts: Padder:12.5kw

Gumming,cutting,sucking device 6.74 KW(optional)

Pneumatic edge spreader 3KW

Driven device 45 KW

Each chamber power: 15.75kw

Machine dimension(Max) L=42meters(8 chambers)

W=51meters

H=3meters

Machine weight: about 48tons

Machine colour: jewelry blue + Crystal White

Technical flow and each part brief :

open width fabrics enter-- width expanding --infra red expanding and centering-- two rollers mangle---tension synchronous control -----mechanical weft straightner--lower overfeeding--screw expanding----upper overfeeding--edge spreader--infra-red inspector--overfeeding pin on--heat setting---coolant air--pin off--exit--plaiter or rolling

Machine Drawing:

Note: Please contact me to get more details,we can make 2/4/6/8/10/12 chambers.

Our machine can heated by gas,thermal oil.

We can equips different brand weft straightner according to customer requirement.

Machine catalogues as below:

Sales Policy:

We had exported our stenter machines to many countries,in the stage of opening our international market,we will always provide the lowest price. For the country that we have not sold yet,we will give the speical price to prompt.