Home  >  Farm Machinery  >  Farm Machinery  >  Feed Processing Machines

feed pellet machine, 1. animal feeds pellets, 2. 2.5, 3,4mm feed pellets, 3. easy digestion, 4. favorable price - details see: https://www.machineto.com/szlh-animal-feed-pellet-machine-fish-feed-pellet-machine-feed-pellet-machine-0086-159-3904-5080-10183849

SZLH animal feed pellet machine

Features of feed pellet machine:

♦Advanced belt-driving system with double motors on animal feed pellet machine, stable and reliable.

♦ Adopting high-qualified components on animal feed pellet machine, with long service life and low cost

♦ Whole transmission parts (including motor) of animal feed pellet machine chooses high-quality NSK/SKF bearings to ensure the transmission efficient, stable, low noise. Main motor choose Siemens.

♦ This animal feed pellet machine is equipped with full single layer stainless steel conditioner, ring die and cutter.

♦ Optional parts: Animal feed pellet machine can be equipped with double jackets stainless steel conditioner and dual spindle differential conditioner according to demands.

♦ A variety of overload protection devices and warning signs on animal feed pellet machine.

♦ Structural alloy steel main shaft with good strength and toughness.

Animal feed pellet machine can be widely used in pelletizing poultry feed, fish feed, cotton seed hulls, and other materials

Main Data of feed pellet machine/mill:

Model	Power(kw)	Power for feeder(kw)	Power for modulator(kw)	Capacity(T/H)
SZLH250	7.5*2	0.75	2.2	1-1.5
SZLH350	37*2	0.75	3	2-8
SZLH450	55*2	1.5	7.5	5-15
SZLH520	75*2	1.5	7.5	6-20
SZLH650	110*2	2.2	11	12-25

More detailes of feed pellet machine:

Spare parts of feed pellet machine/mill:

ring die roller

Feed Pellet Making Line Process

Crushing process – Hammer mill

In the feed processing process there may be a number of ingredients that require some form of processing. These feed ingredients include coarse cereal grains, corn which require particle size reduction that will improve the performance of the ingredient and increase the nutritive value. Amisy FSP series Hammer mill is able to produce a wide range of particle sizes, it work with any friable material and fibre and very easy to use. It is used for grinding raw materials by large and medium livestock and aqua feed mills

Mixing process – Feed Mixer

Efficient mixing is the key to good feed production. The feed will not be the balanced formulation, so it should be well mixed before pelletizing process. Amisy Horizontal Feed mixer is a mechanical means of achieving this. It consists of a series of paddles or metal ribbon blades mounted on a horizontal rotor within a semi-circular trough. The blades move the material from one end of the mixer to the other, tumbling it as it goes. It can mix wet ingredients or mixtures of wet and dry materials, as well as mixing dry ingredients.

Pelletizing process – Feed Pellet machine

Pelletizing is a key process to the production of high quality animal feeds as it ensures that the feed formulation is in the correct quantities for all that eat them. It should be mentioned that impurities in the raw materials like metal, may damage the die and rollers of wood pellet making machine, so we equipped demagnetizer to remove the impurities. Each bite of a pellet made by our pellet mill will have the same designed formulation ensuring all the stock are feed as intended.

Cooling and screening process

Cooling and screening process The Pellets from pellet mill may exit at up to 88°C and 17-18% moisture. The temperature of pellets must be quickly reduced to make the moisture level to 10-12% or less for proper storage and handling. Pellets must therefore be cooled and dried. Our cooler Adopt counter-flow cooling principle, pellet cooled fully and equally. The temperature of the pellets after cooling is not higher than room temperature +3-5 degree.

Packing process

After cooling process,the pellets will be bagged or stored according to your need and requirement.The packing process is effectively handled by our Semi-Auto Packing Machine.the finished feed is weighed by the computer,then pneumatically discharge into the bags.Weighed bags would then travel along a conveyor where machines are available for sewing the tops of the bags in which dry feed may be placed for storage.

PLC controlling

All the process above will be controlled and monitored by our advanced computer controlling system. The control center is collected in accordance with the actual value and the current settings for contrast, which will ensure the stability of the whole processing in order to give full play to the pellet plant production capacity and to prevent plugging.

Working site of feed pellet machine:

Certificate of Pellet Making Line