Home  >  Farm Machinery  >  Farm Machinery  >  Feed Processing Machines

wood hammer mill, 1.easy to operate, 2.portable and stable, 3.low consumption, 4.high output - details see: https://www.machineto.com/supply-competitive-quality-hammer-mill-small-hammer-mill-wood-hammer-mill-with-ce-10183986

Wood Hammer Mill

Introduction

Hammer mill is mainly used for crushing all kinds of feed material and wood. While crushing the feed materials, the adjustable size of feed material can reduce the energy consumption of animal chew on, on the other hand on the transport, storage, mixing and granulation is more convenient, efficient and better quality. while crushing the wood materials, the material can be crushed into very small size to make the pellet.

Working principle

Material went into the crushing chamber through the hopper, then it was crushed by the high speed rotation of the hammer. Under the effect of centrifugal force, the broken material

along the outer edge of the rotor, by continuously hammer, tooth plate, sieve extrusion,

collision, blow, rub and was crushed quickly.Crushed powder was sent out of the

crushing chamber through the centrifugal force of the rotor and the fan suction force.

But the unbroken materials will repeat the above process until it was crushed and sent

out of the crushing room.

Main data

Model	9FQ-36	9FQ-36B	9FQ-40	9FQ-40B	9FQ-42	9FQ-50	9FQ50-40	9FQ50-60
Dimension (mm)	1230*750*1070	850*630*800	945*835*768	837*780*828	730*650*920	1100*930*980	1150*1200*1090	1157*1355*1130
Weight (kg)	85	130	170	120	170	280	300	380
Diamerer of rotor (mm)	360	360	400	400	420	500	500	500
Power (kw)	5.5-7.5	5.5-7.5	7.5-11	7.5-11	11	11-13	22-30	37-45
Speed of the main shaft (r/min)	4600	4600	4000	4000	3200	3300	3400	3400
Width of Crushing chamber (mm)	202	202	202	202	280	280	400	600
Number of hammer	12	12	12	12	16	16	24	36
Width of the Sieving slice (mm)	200	200	200	200	275	267	396	597

How to choose the suitable hammer mill

1. Firstly, you shoold take the raw material into consideration, different matreials need

different model of feed mill.

2. The rates capacity should also be considered. The selected feed mill’s capacity should

be slightly larger than the actual capacity to avoid the decline of the oputput, which

caused by the abrasion of hammer or the leakage of the duct.

Pictures of the hammer mill

Overview of the hammer crusher: the hammer mill can use the diesel engine and the electric motor as the drive power.

This hammer mill can add the wheels and the self-suction device to make it works easily.

The Cyclone seperator.

The related working process.

The final products with different size of sieve.

If you are interested in our product, please contact Helen,