|Place of Origin:Zhejiang China (Mainland)||Brand Name:ZJTEX||Model Number:HB||Phase:2|
|Type:Hybrid||Certification:CE,CE UL||Step Angle(degrees):1.8 degree||Holding Torque:0.9-1.9Nm|
|Current / Phase:0.5-5A|
ZJTEX designs and manufactures a wide range of stepping motors from 1.1 diameter
(permanent magnet design) to 4.2 diameter (hybrid).
ZJTEX specializes in customizing our wide range of standard designs to meet the needs
of demanding OEM applications. Our experienced team of engineers is here to
work with you to lower your installed cost, improve machine reliability, and reduce
your time to market.
1 high torque
2 no noise
3 low vibration
4 stable temperature
1 SR driver model Y3SSR8,60mm 3 phase step motor match with ME120N power supply , 86mm 3 phase step motor match with ME180N power supply ,max current 7.8A,microstep 1000,1600,2000,3200,4000,5000,6400,51200 available,pulse+direction control mode
2 motor size 60&86mm,length 54.5&76.5&66.5,torque 0.9&1.5&1.9N.m
3 input voltage 24~75VDC
4 with particular current technique,reduce the current noise, no-loading motor speed can reach to 4000rpm
5 motor current can be reduced half or 90% automatically after stop running around 1 second
6 Steady holding torque, the loss less than 5% when the surface temperature up to 70 °C.
7 The incoming signal of the drive adopt optical electrical isolation method, the highest reaction frequency 2MHz.
8 Error Protection:
Error phase / open circuit protection
Over voltage / under voltage/ over current protection