Home  >  Industrial Supplies  >  Motors  >  Stepper Motor

Stepper motor drive 2M530 - details see: https://www.machineto.com/stepper-motor-drive-2m530-10239016

Stepper motor drive 2M530

Kinco Stepper Drive serve the low-end market of motion control applications, cost effective and easy to use.
Stepper Motor Drive 2M530

Features:
1. The maximum supply voltage can reach 48V;
2. The bipolar constant current drive mode is taken with a maximum drive current up to 3.5A per phase, which can drive any two-phase bipolar hybrid stepper

motors with a current less than 3.5A;
3. The drive output phase current of a motor can be regulated through the DIP switch, to match motors of different specifications;
4. Supporting automatic half current function of motors in statically locked status, which can greatly reduce heat dissipation of the motors;
5. A dedicated control chip is used, with a maximum of 256/200 subdivisions. The subdivision function can be set by the DIP switch, to ensure the best

operation stability;
6. Supporting offline function so that the output current of a motor can be cut off if necessary;
7. Optical coupling devices are used for the isolation of the input circuit of the control signals to reduce interference of external noises.

Supply voltage	DC 24V ~ 48V
Output phase current	1.2A~ 3.5A
Control signal input current	6~16mA
Cooling method	Natural air cooling
Operating environment	Avoid the environment with a great amount of metallic powder, oil mist, or erosive gases
Operating temperature	-10°c ~ +45°c
Operating humidity	< 85% (non-condensing)
Weight	0.7 Kg