stainless steel holding tank

stainless steel holding tank, Material:SUS304,SUS316L-stainless steel tank, Capacity: 500L-20000L, ISO9001:2008,CE, OEM - details see: https://www.machineto.com/stainless-steel-holding-tank-10032076
Processing:Storage Tank,ManufactureCondition:NewPlace of Origin:Zhejiang China (Mainland)Brand Name:JB
Model Number:JB-KW201Processing Types:food,dairy,fruit juice, beverages,phamacy, chemical industryVoltage:380vPower(W):0.55-7kw
Weight:1ton-10tonDimension(L*W*H):1980*2000mmCertification:ISO 9001-2008stainless steel holding tank:SUS304/SUS316
Thickness(Inside):3mm to 6mm (as size)Heat preservation layer:50 to 70mm (as size)Thinckness(Outside):1.5 to 3mm (as size)Motor:Brand: ABB
Foot:Adjustable triangular bracketEddy-proof board:Eddy-proof boardThermometer:According to customer requirementsLadder:According to customer requirements
Liquid level meter:According to customer requirements   
stainless steel holding tank
contact supplier for stainless steel holding tank


stainless steel holding tank

Performance;

  1. The series of equipment have the functions of heating, cooling, heat preservation and mixing preparation. The vessel carries out design and processing according to “Technical condition for steel made pressure vessel”.
  2. The specifications for selection are 0.05m3~5.0m3different volumes. It can also carry out the design and processing according to the actual technology requirements of customers.
  3. Adopt interlayer structure, with the advantages such as large heating area and small welding etc.
  4. The shaft seal adopts sanitary level hard alloy and silicon carbide 204 balancing mechanical seal, which is anti-abrasion and anti-press. The rotation speed is 60~82 r/m, and the speed can also be regulated by frequency converter.
  5. The interface adopts internationally general-use standard ISO standard rapid installation chuck type, and the material is imported 316L or 304. The mirror polishing of internal surface Ra≤0.28μm,and the external surface adopts semi-luster polishing treatment.
  6. The liquid meters for selection are glass tube liquid meter, static pressure sensor type liquid meter and supersonic wave liquid meter.
  7. The structure forms are divided into upward and downward round sealing head or downward reverse convex bottom upward round sealing head structure, which can guarantee no residual of liquid medicine.
  8. The jacket structure forms for selection are divided into standard jacket external coiled tube jacket, and honeycombed jacket. The structure is the combination of upward and downward round sealing head and standard layer jacket. It has large jacket space and large heating area, which can reduce the welding seam. The internal bladder is neat, which can guarantee that the material will not be hung on the wall. It has advantages such as beautiful appearance, simple structure and durability. The disadvantage is that it is too high. Additionally, if changing the reducer as horizontal worm gear reducer, the height can be reduced for about 250~330mm.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

stainless steel holding tank

Main technical parameters

Effective volume
(L)
Dimension of tank
Inside D×H(mm×mm)
Diameter inlet&outlet
(mm)
Thickness inside&outside
(mm)
Heat preservation layer
(mm)
Power/Rpm
(kw)
600900×1000382.5mm&1.5mm50mm0.55kw,36r/min
10001200×1000513mm&1.5mm50mm0.75kw,36r/min
20001500×1220513mm&1.5mm50mm1.5kw,36r/min
30001600×1500513mm&1.5mm50mm2.2kw,36r/min
40001700×1830634mm&1.5mm50mm2.2kw,36r/min
50001900×1830634mm&2mm50mm3kw,36r/min
60002160×1830634mm&2mm50mm3kw,36r/min
70002000×2440635mm&2mm50mm3kw,36r/min
80002100×2440635mm&2mm50mm3kw,36r/min
90002200×2440635mm&2mm50mm3kw,36r/min
100002350×2440635mm&2mm50mm3kw,36r/min

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

used dairy stainless steel milk tanks

Technical Requirements:

1. Equipment used mechanical polishing, inner surface should be polished to 300MESH, outer surfacre should be welded joint, legs should be polished to 240MESH and Appearance using 2b.

2. Each tank has the leakage test for half an hour.If it has a jacket, after the successful test of a hydraulic test by inner tank, and then filling the insulation and fixing the outer jacket.

3. All welding is in accordance with the standard of JB/T4736-1997/JB/T4709-2000.

4. The welding structure type and size is in accordance with the standard of HG20583-1997.The flange welding according to relevant provisons of the standard of flange, The fillet weld leg size according to the thickness of a sheet.

5. The verticality is 1/400 between the flange flange agitator mounting surface and the axis of container.

6. All the leakage fillet weld should be ground smooth , butt weld should be polished to parallel and level with the base metal , all nozzles should be flanging and rounded Off.

7. All loose joint using the standard thread of SMS.

8. The hole of flange bolt should be equispaced 0°~180° with the main/vertical line of the relative equipment

9. When the equipment is for hydraulic pressure test,it should control the contect of chlorine ion under 25mg/l in the water, and then which should be removed immediately.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

stainless steel holding tank

Drawing:

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

Photos:

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mixing/storage/Stainless steel tank


stainless steel holding tank
Packaging Detail:steamed wood and plastic package. Or we can provide the general package as you demand.
Delivery Detail:30days

Related Product for stainless steel holding tank


Warning: Cannot modify header information - headers already sent by (output started at /home/machineto/machineto.com/sys/db_mysqli.php:1) in /home/machineto/machineto.com/app/ctrl/productCtrl.php on line 208