small type steady perfermance airflow drier

1.save 50% energy, 2.with airlock & cyclone, 3.drying moisture can be adjust, 4.can drying wood chip, 5.300-3000kg/h output - details see: https://www.machineto.com/small-type-steady-perfermance-airflow-drier-10290697
Condition:NewType:Flash Drying EquipmentPlace of Origin:Henan China (Mainland)Brand Name:mingyang
Model Number:HJ-8Voltage:380VPower(W):11KWDimension(L*W*H):7.5*1.38*3.75
Weight:1800KGSCertification:ISO,CEWarranty:one yearAfter-sales Service Provided:Overseas service center available
capacity:700-800kg/hDiameter of raw materials:3-5mmConsumption of energy:lowthe moisture before drying could be:20-60%
the moisture after drying:8-12%service life:3-5yearswarranty time:one yearprice:USD2675-18752
usage:for drying the wood chip, sawdustH.S CODE NO:8419399090  
small type steady perfermance airflow drier
contact supplier for small type steady perfermance airflow drier


high capacity sawdust Drying machine

Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

1. Hot airflow type dryer

A: Raw materials should be sawdust, suitable for drying the moisture20-50% Final moisture 8-12%

B. Diameter of raw materials: <3mm & < 5mm

C. Temperature of Hot Air: 180-250 °

D: Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials

E:This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

F:The wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

1) Dryer Model BHGJ-I, BHGJ-II, BHGJ-III for biomass materials with lower moisture content 12-25%

In the biomass briquetting plant ,the moisture reducing rate of the dryer HGJ-I, HGJ-II, HGJ-III is 8-12%. This series of flash dryers are equipped with one hot air boiler, suitable for drying raw material with moisture content less than 20-25% for biomass briquetting.If the moisture content of the raw material for biomass briquetting is higher than that, it will need two or three times to dry to achieve the requested moisture content for biomass briquetting plant.


BHGJ Flash Dryer With One Boiler Stove

ModelHJ-4HJ-6HJ-7
Capacity(Kg/hour)200-250KG400-500KG500-700KG
Size of Input Material(Diameter)< 3mm & < 5mm< 3mm & < 5mm< 3mm & < 5mm
Temperature of Hot Air180°C~250°C180°C~250°C180°C~250°C
Consumption of Wood Waste15-20 kg/h25-30kg/h30-35kg/h
Power(Centrifugal Fan+Air Lock)4kw+1.5kw5.5kw+1.5kw7.5kw+1.5kw
Net/Gross Weight700/800kg1200/1300kg1800/1900kg
Dimension(m)6×2×3.65m9×2×3.65m11×2×3.65m

(2) Twin boiler dryer model NHGJ-I, NHGJ-II, NHGJ-III for higher moisture content 20-50%

In the biomass briquette plant ,twin boiler dryer is a newly developed dryer with two hot air boilers, it is suitable for drying raw material with moisture content of 20% -50% for biomass briquetting. It can reduce moisture from 20%-50% to 8-12% for biomass briquetting only one passage or one time. PS: For raw material of moisture 20-35%, only fire and use the first boiler, no need to use the both.


Double Boiler Flash Dryer

Technical data:

Power (Centrifugal Fan+ Airlock): 11 KW+0.75 KW+0.75KW

Net/Gross Weight: 2850/3080 KG

Package Dimension: 1.23*1.24*1.73+1.45*1.42*1.41

+2.45*1.72*1.91(m3)

Raw materials diameter: <1mm & < 5mm

Capacity: 700-1000 KG/H

Temperature of Hot Air: 180-250°C

Consumption of Wood Waste: 60-70KG/H

Overall Dimension:8250*2350*4180(mm3)

used for (wood briquette plant and wood pellet plant)

Why choose us?

Gongyi Xiaoyi Mingyang Machinery Plant
is located in Zhengzhou City, which is the biggest manufacturing base of charcoal making machinery. And we are the one of the earliest and largest manufacturers of renewable fuel & energy equipments and related machinery.
After 15 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. our products and are widely accepted in both domestic and world market, and also exported to more than 85 countries, such as England, Russia, Sweden, Poland, Iran, Sudan, South Malaysia, Indonesia, Vietnam, etc.

Our main production line include:
Charcoal / Biomass Briquette Plant for Agro-Forestry Wastes
Wood Pellet Mill / Feedstuff Pelletizing Plant
oil press machine
Animal feed pellet machine
Nail making machinery plant
Roller Briquette Press for Coal / Charcoal powder
Cold rolling mill

Why the client choose us,because :

We hope sincerely to become your Chinese supplier and partner in the mechanical

small type steady perfermance airflow drier
Packaging Detail:two layers:1. waterproff cloth 2. wood boxes
Delivery Detail:within 15 days after your prepayment

Related Product for small type steady perfermance airflow drier


Warning: Cannot modify header information - headers already sent by (output started at /home/machineto/machineto.com/sys/db_mysqli.php:1) in /home/machineto/machineto.com/app/ctrl/productCtrl.php on line 208