Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Manipulator

All main parts from famous brand, One-year warranty, Lowest vacancy rate in this field, ISO9001:2008 standard, Brand:CLLROBOT - details see: https://www.machineto.com/robotic-arm-project-for-injection-machine-ss550v-10200817

Robotic Arm Project For Injection Machine (SS550V)

Working video: http://youtu.be/Zwou_pRrwGg

The SS SERIES Robot arm is available for sprue separation and parts removal. Self-lubricating pneumatic drive system affords low maintenance, exceptional stability and reliability. This series of robots are constructed on modular principle to ensure high precision and lightness. The main arm rides vertically on a linear slide-rail and slides horizontally (crosswise) on two roller guide-ways, no maintenance is required and smooth running and the elimination of play/slack is ensured. Travel cushions on the vertical axis minimize vibration and ensure smooth deceleration; hydraulic shock absorbers are fitted on the crosswise axis for efficient damping.For maximum flexibility the arm can be easily adjusted to release runner/parts at the operator or the rear side of the machine.Swing angle can be freely adjusted between 60 to 90 degree through a positive but easily adjusted location fitting on the cylinder-driven oscillating arm.The manual clamp system on the Phoenix series of robots allowed them to swing clear of the mould area in seconds; without the use of tools.Built-in ratchet mechanism, which controls motion of the robot arm out of the mould area, enables easy mould changes or maintenance

Control system:

* Palm controller with dialogue type operation interface, the display language is changeable.
* Eight(8) sets built-in programs and 12sets TEACH programs can meet all the requirements.
* Fifty(50) sets memory for mould, easy to set while changed mould.
* Automatically detecting, displaying and recording the failures.

* Screen can display all the input/ output connections points, convenient for fast maintenance.
* LED display important signal, such as Safety Door, MOP, Open/ Close Mould
* A large LCD display provides simple programming and setting of all parameters.
* There are eight(8)standard programs of preset motion sequences are installed and additionally, up to
twelve (12)"Teach programs(created by the operator)can be stored.
* The built-in memory can record up to fifty(50)sets of mould programs making this series of robots fully capable of meeting nearly all processing requirements.

Performance, speed, stability, and durability...all key attributes of the SS series swing-arm robots make them ideally suitable for sprue separation and parts removal on injection molding machines from 15 tones to 400 tones.