Home  >  Printing Machinery  >  Printing Machinery Parts

1.package NO.F196000, 2.Price is available., 3.original and new print head, 4.made in Japan., 5.Delivery within 24 hours . - details see: https://www.machineto.com/print-head-f196000-for-3880-10074014

Picture of the print head

Features:

1.High degree of color reduction

2.Good stability

3. eco solvent

4. High speed accuracy

5. Nozzle is not blocked Nozzle is not blocked

6.original and new 100% .

Details of products:

1.The quality of our product is higher that of other company .The price is lower than others.

2. the nozzle are not clogged

3.All products are original (Made in Japan)

Shipment :

We have Fedex,DHL,EMS account ,send directly.

We have a large inventory ,If you want to put a trial order, we will delivery in a short time .

Fast Delivery :

Express	Fedex(workdays)	DHL(workdays)	EMS(workdays)
North America	2-4	3-5		7-10
Asia	2-3	2-5		5-7
European	4-5	3-5		7-10
Middle East	4-5	3-5		7-10
Australia	4-5	4-5		5-7
South America	5-7	5-7		7-10
Africa	7-10	7-10		7-10

Payment:

Western union , T/T , PAYPAL ,ESCROW,Moneygram

Other parts of the printer :

About us

We believe that the most important thing is to provide our customers the most competitive price and the best service.

welcome to contact with us .

ACTION NOW!!!We are your best choice.

Best regards,

Claire Zhao

Attention :

1 received in my shop to buy the nozzle, the back also with a needle injection nozzle to test to see if the blockage. This is a very redundant, but dangerous practice, first of all, once the nozzle into the water, you do not dry the machine is powered on, ranging from burn-in board, heavy firing head; Secondly, I shop for sale of the nozzle, are rigorously Testing Long before shipment, and playing with a protective fluid, using a needle injection into your header, not only washed away in advance of the protective solution, and because of too much pressure on the hand, is likely to cause nozzle gas block, causing no ink;

2 sprinkler head, face very fragile, absolutely can not bump, do you want to protect. Its surface is a block of aluminum, the inner layer is coated with a crystal oscillator with a very small ink tube. Touch will concave, deformation, or even broken, so the nozzle to be scrapped;

3 Install sprinklers have to be careful, be sure to power down, and put in place. Installed, the handle gently pushed his car to move around, test it is smooth, do not installed on the electricity, because, if the head not in place, it is easy to move a car to hit his head cracked, and staff are feeling, and acting freely strong controllability;

4 Plug the cable, do not bring the ink, but also to ensure good contact with the outlet, do not touch the feet, otherwise, it will cause the nozzle short circuit burned;

5 steel shaft should be clean, smooth, sticky point lubricant used paper towels to wipe, do not come directly to the shaft, the extra oil will flow to the nozzle up, causing damage;

6. Machinery, circuits are correct, we should examine waterways, first look inside the cartridge full of water shortage; Second, check the small cleaning blade, ink pump is dirty;

7 newly installed air nozzle there will be, it will not print properly once, and only his head in the air completely drained before normal a homogeneous lines; First, available intermittent cleaning (once only cleaned two times, and then stopped 30 minutes after cleaning 2 times) repeatedly kept clean excessive cleaning pump will cause ink deposits, not only will print color mixing, Loumo, but also a waste of ink; secondly, it may print some pictures, so that the nozzle exhaust air at work; Again, if the machine has led the waste ink tube, you can start off, and then set a syringe pump hose to the waste ink tube until the ink is so far out of 3-5ML, and then boot the machine using a normal cleaning, this equals artificially head out of the air to come hard, side effects are likely to cause heap ink wash pump. Sprinklers need to pay attention a lot, so blindly replace non-professionals likely to cause human damage, so the line had a rule, the nozzle is not warranty, if you are not familiar with the machine, it was suggested to find a professional to replace the nozzle, so as to avoid loss and unnecessary hassle!