Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

Titanium Tube Heat Exchanger, 1.Carbon steel frame, 2.Stainless steel/Ti Plates, 3.Alfa Laval M10 Replacement, 4.Application: - details see: https://www.machineto.com/plate-heat-exchanger-10241558

Specifications

1.Carbon steel frame
2.Stainless steel/Ti Plates
3.Alfa Laval M10 Replacement
4.Application:CIP Heating, Wine Tempering

K&V Gasketed plate heat exchanger: Can replace Alfa Laval M10M/ M10B

Frame and Plate Heat Exchanger 300kw - 800 kW for CIP Heating, Wine Tempering

Model	BH100B / BH100H
Cross Reference ALFA LAVAL	M10M, M10B
Height, H [mm]	1084	1084
Width, W [mm]	470	470
Min standard length, L [mm]	700	700
Max standard length, L [mm]	2300	2300
Vertical port distance, VC [mm]	719	719
Horizontal port distance, HC [mm]	225	225
Max temperature [°C]	180	180
Max pressure [barg]	10	16
Flange size	DN100/4”	DN100/4”
Max. flow rate [kg/s]	50

Material of Plate		Suited Liquid Kinds
Stainless Steel (AISI304.316 Etc)		Pure Water, Normal Water, Oil for eating, Mineral Oil
Ti, Ti-pd		Sea Water, Saline Water, Mineral Water
20Cr, 18Ni, 6Mo (254SMO)		Dilute Sulphuric Acid, Organic Water Solution
Ni		High-temp and concentration caustic soda
Hastelloy (C276, D205, B2G)		Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Material of Gasket	Operating Temperature ° C		Suited Liquid Kinds
NBR	-15~+135° C		Water, Sea Water, Mineral Oil, Salinous Water
EPDM	-25~+180° C		Hot Water, Steam, Acid, Alkali
F26	-55~+230° C		Acid, Alkali
TPF	0~+160° C		High Concentrated Acid, Alkali, High temperature Oil, Steam

Standard design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids

between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.

The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Typical capacities

Liquid flow rate

Up to 16 kg/s (250 gpm), depending on media, permitted

Pressure drop and temperature program.

Water heating by steam

300 to 800 kW

Working principle

Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.


Food industry:Milk pasteurization, Milk and beverage pasteurization , Wine tempering, Bottled water treatment , CIP (Cleaning-in-Place) heating , Reverse osmosis water.

Marine application :Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baoder oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers’ cabins and freight spaces

Others:turbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating,

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

Certified by ISO9001, CE, UL, WRAS, ROHS, CCS etc.