Open Mixing Mill HZ-7015

1.Open mixing mill, 2.Speed:960r/min, 3.Front roll speed:9.8m/min, 4.Roller speed ratio:1:1.22, 5.Simply roll diameter:160mm - details see: https://www.machineto.com/open-mixing-mill-hz-7015-10340483
Condition:NewType:Open Mixing MillPlace of Origin:Guangdong China (Mainland)Brand Name:LIXIAN
Model Number:HZ-7015Voltage:380VPower(W):5.5KWDimension(L*W*H):1100*700*1200mm
Weight:580KGCertification:CE/ISO/ASTMWarranty:3 years warrantyAfter-sales Service Provided:Overseas service center available
Function:Open mixing millSimply roll diameter:160 mmRoll surface width:320 mmRoll gap:4 mm
Front roll speed:9.8 m/minA feeding quantity:1-2 kgRoller speed ratio:1:1.22Speed:960r/min
Motor Type:Y132M2-6Power:5.5kW  
Open Mixing Mill HZ-7015
contact supplier for Open Mixing Mill HZ-7015


Open mixing mill HZ-7015

Equipment summary:

Open mixing mill manufactured according to GB / T 13577-2006 and GB 20055-2006 design.

Apply to the compounding of thermoplastics, mastication, or plastic sheeting; rubber thermal

refining, tablet, mastication, mixing.

Applicable industry:
Open mixing mill refining presses for thermoplastics compounding, plastic necklace, or plastic sheeting.

Technical parameter:

Roller Specification( Diameter×Length) 160×320mm
Adjustable gap0~10mm
Roller speed ratio1:1.22
Roll gap4mm
Reducer typeBWY22—23—5.5KW
Motor TypeY132M2—6
Power5.5kW
Speed960r/min
Mixing capacity0.2-5kgs
Roller temperaturenormal temperature~260°C
Heating timenormal temperature ~150°C about 15min
Heating modeelectric heating
Temperature accuracy±3.5°C
The drum in vitro thermometrythe installation of temperature the meter then extend the line

to the thermostat temperature measurement digital display

Temperature controlPID controller make in Taiwan
Roller revolving speedfixed speed(24 revolving/min)
Roller hardnessHRC 50~60(Made in Taiwan)
Roller processingPolished
Baffle materialPTFE material, made of sharp type
Safety deviceMultiple touch touch emergency stop, safe operation
PowerAC380V,20A
Motor power20KW
Outside dimension1100×700×1200mm
Weightabout 580kg

Structure features:

1)The roller are made of high-carbon steel quenching treatment, the surface of hard wear;

lumen of processing, the roll surface temperature uniformity.

2)The machine is equipped with internal heating wire device, roller temperature uniformity.

3)Drive system with worm reducer, compact structure, low noise, high efficiency, long service life.

4)The machine overall base, easy to install.

Operate steps:

1) Turned on the power , check the machine no-load operation is normal or not , as usual, and then continue to work.

2)Access trays placed Fortunately workbench.

3)Set the temperature and rotational speed of the front and rear rollers.

4)When the temperature reaches the set temperature, refining the material to be put into blocking

plate between refining.

5)By hand wheel adjustment the gap between the two rolls to obtain products of different thickness, and

adjusting the distance between the two retaining plate to adjust the product width.

6)Refining completed, clean the machine, turn off the power.

Machine structure(for you reference)

1.Emergency Stop Switch (4 pieces)

2.Control panel

3.Ampere meter

4.Rail emergency stop

5.Gap adjustment handwheel

6.Roller

7. Splice metal disk

8.Emergency Stop Switch (There is 1 switch at front and behind)

9.Rack

Last Update Time:2013-09-04

Open Mixing Mill HZ-7015
Packaging Detail:Open mixing mill was packaged by standard export wooden case.
Delivery Detail:within 25 days after payment normally,special for the request.

Related Product for Open Mixing Mill HZ-7015