Oblique wave filler Cooling tower fills / packing
Oblique wave filler Cooling tower fills / packing, 1.Small ventilation resistance, 2.Strong hydrophilicity, 3.ISO9001:2008 - details see: https://www.machineto.com/oblique-wave-filler-cooling-tower-fills-packing-10240548
| Condition:New | Cooling Type:Counter Flow | Place of Origin:China (Mainland) | Brand Name:Flying Dragon |
| Model Number:F003 |
Oblique wave filler Cooling tower fills / packing
1. performance characteristic:light weight, high strength, good flame retardant performance, corrosion resistance, advanced design, small ventilation resistance, strong hydrophilicity, large contact area.
2. Suitable temperature: 65 °C ~ - 35 °C
3. application: square counterflow cooling tower
4.tech index:
| Oblique Wave Filler | ||||
| standrad | result | |||
| density | g/cm3 | ≤1.55 | 1.41 | |
| tensile strength | Mpa | vertical | ≥42.0 | 50.5 |
| Horizontal | ≥38.0 | 46.3 | ||
| tear(ing) strength | KN/m | vertical | ≥150 | 181.8 |
| Horizontal | ≥160 | 192.9 | ||
| Low-temperature folded experimental cold-resistant degree | °C | ≤-18 | ≤-20 | |
| oxygen index | ≥40 | 40 | ||
| material | The interlamellar spacing mm | assembly packing's height mm | assembly packing's size mm | temperature | |
| PVC | 0.4±0.03 | 30 | 500 | 1000*500*500 | 65°C_-35°C |
| Packaging Detail:1.Wooven bags 2.Woden cases 3.Ton bags |
| Delivery Detail:2000 cubic inch within a week |
Related Product for Oblique wave filler Cooling tower fills / packing
galvanized water well tanks of closed cooling tower
galvanized water well tanks1.No pollution
2.Avoid furr
3.Cost saving of energy consumption and repair
4.Water Saving
High Efficiency FRP Cooling Tower Fill XT-T40
Cooling Tower Fill1.Motor Power:1.1
2.Flow per hour:40
3.High*Wide:215*165
4.Certificate ISO/CE
High Efficiency FRP Cooling Tower XT-T40
Water Cooling Tower1.Motor Power:1.1
2.Flow per hour:40
3.High*Wide:215*165
4.Certificate ISO/CE
50T cooling tower for Injection Machine
cooling tower:1.Min. air resistance
2.Assembly convenient,durable
3.low water pressure
cooling tower experiment - BNX series cooling equipment
cooling tower experiment1 prevent fouling
2 easy maintenance
3 Water Saving
4Cost saving of energy consumption
High Efficiency FRP Cooling Tower XT-T40
Water Cooling Tower1.Motor Power:1.1
2.Flow per hour:40
3.High*Wide:215*165
4.Certificate ISO/CE
industrial cooling tower DBNL-30
1.PVC high quality in Full2.low noise and large flow range,
3.high efficiency
4.firmly and durable
200T high quality cooling tower
high quality cooling tower:1) input water temperature 50 degree is OK
2) Fiberglass material
3) good radiating
200T high quality cooling tower
high quality cooling tower:1) input water temperature 50 degree is OK
2) Fiberglass material
3) good radiating
30T Water Cooling Tower for injection machine
Cooling Tower(1).Motor Power:0.75
(2).Flow per hour:20
(3).High*Wide:200*145
(4).Certificate ISO9001:2000
30T Water Cooling Tower for injection machine
Cooling Tower(1).Motor Power:0.75
(2).Flow per hour:20
(3).High*Wide:200*145
(4).Certificate ISO9001:2000
Industrial round water cooling tower for plastic injection machine
Industrial round water cooling tower1.PVC high quality in Full
2.low noise and large flow range
3.high efficiency