Home  >  Industrial Supplies  >  Air-Compressor Parts

Inlet temperature:Not more than 45 degree, Cooling method:water cooling, Inlet pressure:0.4-1.0MPa, Dew point:2~10 - details see: https://www.machineto.com/normal-inlet-temperature-water-cooling-refrigerated-air-dryer-10209697

Normal inlet temperature water-cooling refrigerated air dryer

Working conditions and technical specifications:

Inlet temperature:45°C

Cooling method:water cooling

Inlet pressure:0.4-1.0MPa

Pressure drop:0.02MPa

Dew point:2~10°C

Refrigerant:R22

Cooling water inlet temperature: not more than 32°C

Cooling water inlet pressure:0.2~0.4MPa

Air dryer specifications:

Item Model		SAD-10HT(N)W	SAD-20HT(N)W	SAD-30HT(N)W	SAD-40HT(N)W	SAD-50HT(N)W	SAD-10HT(N)W	SAD-60HT(N)W	SAD-80HT(N)W	SAD-100HT(N)W	SAD-150HT(N)W	SAD-300HT(N)W
Air flow(Nm3/min)		10.7	25	33	45	55	65	85	110	160	220	300
Power source(V/Hz)		380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50	380/50
Compressor(total)power(HP/kW)		3/2.5	5.0/4.0	7.5/6.1	10.5/8.0	12/9.0	15/11.3	20/16	25/19	36/27	50/38	80/60
Cooling water circulation(m3/h)		3.0(1.8)	7.2(3.6)	11.2(5.9)	14.5(7.2)	19.5(9.2)	21.8(10.8)	25.5(12.4)	29.5(14.6)	38(18.6)	48.8(24.4)	72(36)
Air connection size		ZG2	DN80	DN100	DN100	DN125	DN125	DN150	DN150	DN200	DN200	DN250
Condenser pipe size		ZG1	ZG1.5	ZG1.5	ZG1.5	ZG2	ZG2	ZG2	ZG2	ZG2.5	ZG2.5	ZG3
Weight(Kg)		260	430	860	980	1150	1250	1600	2200	3000	3200	4100
Dimension	L(mm)	1180	1360	1650	1850	2100	2280	2420	2750	3108	3200	4100
	W(mm)	670	710	950	850	920	1300	1340	1350	1400	1920	4000
	H(mm)	1080	1220	1590	1630	1645	1880	1900	2004	2122	2122	2580

Working conditions and technical specifications

1.Refrigeration system with perfect configuration.Critical machine components are adopted imported brand to ensure the processing effect while ensuring reliable operation and longevity.

2.Refrigeration and air system are accurate calculated by experts and designed parameter are retained more than 20%.

3.Complete gas liquid separation.Using feltered liquid separator,with American HANKISON cartridge,complete gas-liquid separation to avoid moisture secondary evaporation,ensuring drying effect.It is more efficient than the cyclone separation,separation efficiency up to 99.00%.

4.Pipeline system adopts internal galvanized copper,working pressure 0.3-4.5MPa as your choice.

5.Using stainless steel pipeline,suitable for pharmaceutical,food industry,resistance of acid,alkali and corrosion.

6.Heating exchanger using corrugated copper tube inner and outer,increasing the cooling capacity utilization,countercurrent structure,good return temperature,no condensation.

7.Evaporator with hydrophilic processing thin copper tube with aluminum fins,spoilers structure high heat transfer efficiency.

8.Sewerage system optimization.Refrigerated air dryer using three or more grade drainage,emit large amounts of condensate and oil timely and effectively and thus ensure the system clean and dry while reducing the system load.

9.Various forms(single,set,joint control,PC board,frequency,etc) of the control circuit,suitable for different users.

10.Outer rotor cooling fans,big air volume,low noise,long life frequently start and stop.

11.Water cooling condenser with low-winged brass,slow water flow,multi-stroke,high heat transfer efficiency,not easy scaling in long term use.

12.Armstrong retardant foam insulation,cold lost least.

13.Compressor protection class is IP54(dust and splash-proof)