Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Dry Cabinet

Inlet temperature: normal type:not more than 45 degree, High type:not more than 80 degree, Cooling method:air cooling - details see: https://www.machineto.com/normal-high-inlet-temperature-air-cooling-refrigerated-air-dryer-10288222

1.Heat exchanger 2.Evaporator 3.Gas-liquid separator 4.Jam-prevent drain filter

5.Manual draining valve 6. Refrigeration compressor 7.Aspirating filter 8.Vaporization 9.Separator

10.Gas-liquid mixer 11.Thermal expansion valve 12.View monitor 13.Dry filter 14.Tank

15.Hot gas bypass valve 16.Water adjusting valve 17.Water filter 18.Condenser(air-cooling)

19.Condenser(water-cooling) 20.Per-cooler(water-cooling) 21.Per-cooler(Air-cooling)

22.Auto-drainer

High (Normal) inlet temperature air-cooling refrigerated air dryer

Working conditions and technical specifications

Inlet temperature: normal type ≤45°C High type ≤80°C

Cooling method:air cooling

Inlet pressure:0.4-1.0MPa

Pressure drop:≤0.03MPa

Dew point:2~10°C

Refrigerant:R22

Air dryer parameters:

Item Model		SAD-1 HTF	SAD-2HTF	SAD-3HTF	SAD-6HTF	SAD-10HTF	SAD-1 3HTF	SAD-15HTF	SAD-20HTF	SAD-30HTF
Air flow(Nm3/min)		1.2	2.4	3.8	6.5	10.7	13.5	17	23	33
Power source(V/Hz)		220/50	220/50	220/50	220/50	380/50	380/50	380/50	380/50	380/50
Compressor power(HP/kW)		1/0.85	1/0.85	1.25/1.25	1.5/1.5	3/2.5	3/2.5	3.6/3	5/4	7.5/6.5
Fan power(W)		90	90	120	120	2*120	2*120	2*120	2*160	4*180
Air pipe connection		ZG1	ZG1	ZG1.5	ZG2	ZG2	DN65	DN65	DN80	DN100
Weight(Kg)50		50	90	110	200	260	280	330	450	780
Dimension	L(mm)	450	450	500	560	670	670	670	1450	1650
	W(mm)	630	700	850	900	1180	1180	1180	750	930
	H(mm)	600	850	900	1000	950	950	950	1010	1580

1.Refrigeration system with perfect configuration.Critical machine components are adopted imported brand to ensure the processing effect while ensuring reliable operation and longevity.

2.Refrigeration and air system are accurate calculated by experts and designed parameter are retained more than 20%.

3.Complete gas-liquid separation.Using feltered liquid separator,with American HANKISON cartridge,complete gas-liquid separation to avoid moisture secondary evaporation,ensuring drying effect.It is more efficient than the cyclone separation,separation efficiency up to 99.00%.

4.Pipeline system adopts internal galvanized copper,working pressure 0.3-4.5MPa as your choice.

5.Using stainless steel pipeline,suitable for pharmaceutical,food industry,resistance of acid,alkali and corrosion.

6.Heating exchanger using corrugated copper tube inner and outer,increasing the cooling capacity utilization,countercurrent structure,good return temperature,no condensation.

7.Evaporator with hydrophilic processing thin copper tube with aluminum fins,spoilers structure high heat transfer efficiency.

8.Sewerage system optimization.Refrigerated air dryer using three or more grade drainage,emit large amounts of condensate and oil timely and effectively and thus ensure the system clean and dry while reducing the system load.

9.Various forms(single,set,joint control,PC board,frequency,etc) of the control circuit,suitable for different users.

10.Outer rotor cooling fans,big air volume,low noise,long life frequently start and stop.

11.Water cooling condenser with low-winged brass,slow water flow,multi-stroke,high heat transfer efficiency,not easy scaling in long term use.

12.Armstrong retardant foam insulation,cold lost least.

13.Compressor protection class is IP54(dust and splash-proof)

Air dryer picture: