Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Cutting and Forming Tools  >  Milling Cutter

Power cutter -4 flutes cutting tool-, Suitable for roughing and semi-finishing on tough materials by unequel flute design - details see: https://www.machineto.com/msx440-power-cutter-cutting-tool-for-tough-materials-10148482

•It is very suitabke for roughing and semi-finishing on stainless steel and tough materials by unequal flute design

•High performance for reducing roughing time

Total : 16 sizes

The hardness of Mugen Coating is Hv3,400 and the oxidation temperature 1,100deg.C, based on TiAlN( Titanium Aluminum Nitride).

As shown by the following cutting samples, Mugen Coating is recommended for various materials such as hardened steel( 60HRC ), pre-hardened steel, raw steel and copper because of strong wear-resistance and high lubricity. In addition, and kind of cutting fluid is available such as water soluble, oil, air blow and oil mist.

Machining Data

Material/ SUS304, Coolant/ Water soluble fluid, Cutting time/ 3min 40sec

We guarantee to deliver stable and reliable products for customer satisfaction

We have introduced Rollomatic made in Swiss. (World-first processed machine)

But Rollomatic have been using by many tool manufactures in small diameter market. We developed the original high-precision tool grinder in order to differentiate with competitor

We have an emphasis on inspection of the tool.

To measure of R-accuracy, we have introduced the measuring machine of Walter. We check the all pieces end mills for visual inspection, and we developed the original machine for measure of OD.

Also we were able to achieve automation packing system. So there is not a possibility that we ship defective products.

We can supply stable products.

Research and development organization devoted to user-oriented

Our company has the most advanced high speed machining center and is machining on high-level test cut. We are most important to user needs, increase customer satisfaction by resolving customer’s requirement. At the same time, we are working on research and development in order to advancement of our technology.

Specialize in small diameter carbide end mil

Our products are demand on the manufacture which is precision mold, high-precision machining and has been used in many customers, such as digital consumer electronics, high-precision electronics part, auto parts and etc.

Located toward the future more and more electronic components lighter compact and microstructure. To commercialize this, you must use smaller diameter end mill. Our company will concentrate management resources on research and development for improvement of processing accuracy and generating technology.

Our product coats the top share on small diameter end mill market in Japan.

We have appointed distributors more than 20 all over the world. Export sales account for over 20% of the total company sales.

We run a booth at large exhibition of the world, and have introduced our products

We have enough stock.

Minimized stock-out, and we always have many various sizes for responding to customer requirement.

We have been sold our products through our distributor except special terms.

If you give us your inquiry, we will introduce our distributor.

First, we will contact to you from our person in charge of your county