Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Road Marking Removers

Milling-Planning Type Remover, Function of removing marking, Function of milling and rubdown, Emergency stop device - details see: https://www.machineto.com/milling-planning-type-road-marking-remover-dy-mpr-i-10121020

DY-MPR-I Milling-Planning Type Road Line Remover

Zhengzhou Dayu machinery Co.,Ltd is professional construction machinery for Road Marking Machinery and road mark paint.

Description of DY-MPR-I Road Line Remover

DY-MPR-I Milling-Planning Type Road Line Removeradopts tungsten steel knife head to removing many kinds of surfaces, especially for removing the road marking line with higher effect and long service life.

Functions and Features of DY-MPR-I Road Line Remover

1.Function of removing marking: Quickly remove the marking such as cold, thermoplastic, tape and so on.

2.Clean function: It can remove many kinds of materials such as oil stain, plastics and burnt cicatrices and so on.

3.Function of milling and rubdown: Effectively remove the heave of surface of bitumen and concrete.

4.Function of surface seam pre-treatment before tedding: Effectively remove the grounding to form a clean work surface seam, so effectively increases the tedding quality of surface seam.

Technical Parameter of DY-MPR-I Road Line Remover

No.	Item	Spec.
1	Engine	Japanese Robin or Honda 9.0HP air-cooled Gasoline Engine
2	Removal Cutter	The down scraping knife-head which are made of imported tungsten alloy are hard and high speed rotating. The milling drum component parts can be quickly and freely changed according to the different demands of work, which can meet the different width and depth of work. The rotating place adopts sealed bearing, and the shock-reducing design of dentate transmission belt increases the effects and durability of equipment.
3	Removing grinding head	Special steel cutter milling head.
4	Function	Remove marking, road bump and road surface roughening.
5	Protection Device	Connect with emergency stop device to ensure the stop in the condition of out of control.
6	Depth Adjuster	The handle revolving depth adjuster adopts accurate pitch, which can accurately control the depth as required.
7	Milling depth	2.5mm (adjustable)
8	Milling width	200mm (adjustable)
9	Wheel	The tyres of whole machine are special abrasion proof modified rubber wheels.
10	Size & Weight	900mm*600mm*970mm (L*W*H) 90kg
11	Optional system	Roll booster

Tools

You may also be interested in this/these product(s)

• Thermoplastic Road Marking Machine

DY-STM Thermoplastic Screeding (Convex) Road Marking Machine

DY-HPT Hand-push thermoplastic Road Marking Machine

DY-HTPT Hand-Push Thermoplastic Pedestrian Road Marking Machine

DY-VHDP Vertical Hydraulic Double-cylinder Pre-heater

• Cold Solvent Road Marking Machine

DY-MSAL Medium-size Driving Type Airless Road Marking Machine

DY-SSAL Small Sitting Type Airless Road Marking Machine

DY-HAL-I Hand-push Airless Road Marking Machine

DY-HAL-II Hand-push Airless Road Marking Machine

• Two-Component Road Marking Machine

DY-SSTC-II Self-Propelled Structural Two-component Road Marking Machine

DY-BSTC Two-component Driving Type Road Marking Machine

For more information on our new product,

please check our website,www.road-marking-machine.com