Melasty Single Milking Machine (Mobile) - Stainless Steel Bucket / Rubber Liners / 240cc Milk Claw

Single Mobile Milking Machine, 240cc Milk Claw capacity, Rubber Liners, Stainless Steel Bucket, 60:40 Pulsation - details see: https://www.machineto.com/melasty-single-milking-machine-mobile-stainless-steel-bucket-rubber-liners-240cc-milk-claw-10186788

Condition:New	Type:Mobile, Portable Milking Machine	Use:A small milking machine to milk Cattle type animal family; like cow.	Place of Origin:Bursa Turkey
Brand Name:MELASTY	Model Number:DK 1-PK	Model Name:Dream	Frame Color:Galvanized
Milk Claw Cap. & Cluster Weight:240 cc & 2250 gr.	Bucket Type & Volume:1 x 30 lt. S/S Bucket	Milk Liners:Rubber Liners	Vacuum Pump Type / Flow Rate & Tank Vol.:Dry - 180-200 lt./min fixed on electric motor / 18 lt.
Engine Power & Rotation / Voltage:0.55 kW, 1450rpm, 220V 50Hz - Custom voltage can be applied.	Milking Capacity:10-12 Cattles (Cows) /hour	Dimensions and Weight:L:120 W:70 H:100 (cm) / 53 kg.	Certification:ISO 9001, CE

Melasty Single Milking Machine (Mobile) - Stainless Steel Bucket / Rubber Liners / 240cc Milk Claw

contact supplier for Melasty Single Milking Machine (Mobile) - Stainless Steel Bucket / Rubber Liners / 240cc Milk Claw

Melasty® Milking Machines & Equipments

Our brand name "Melasty" delivers and serves more than 20 countries around the world to contractors, dealers and end-users.

There are 2 models 3 types and 72 different combinations for “Melasty® Single Milking Machines”. “Trend” & “Dream” models has different combinations for Cow (Cattle), Goat and Sheep.

Each Model and type can be freely combined with following options. Please combine as you wish and I will quote for your combination. A simple and most common combination and price information been followed by also.

TREND(Electrostatic Red) – Single Milking Machine (DK 1-PK)

TECHNICAL FEATURES

BODY

Length (cm) :130

Width (cm) :61

Height (cm) :98

Weight (kg) :52-53

85x70x93 cm when packed.

VACUUM PUMP & ENGINE

Engine Power :0,55 kW

Rotating :1450 rpm

Voltage :220 V

Flow Rate :180-200 (l/min)

Palette Type :Graphite

Palette Size(mm) :70 x 43 x 4.9

Tank capacity :18 lt.

Pulsation Ratio :60:40

Pump Type :Dry

MILKING GROUP

Bucket Type :Stainless Steel

Liners :Rubber

Bucket Volume :30 lt.

Milk Claw Capacity : 240 cc

Cluster Weight :2250 gr.

Milk Hose(mm) :225 (25 x 16)

Pulse Hose(mm) :200 (14 x 7)

Combination options;

Single Milking MachineorDouble Milking Machine

Electrostatic Red, Galvanized orChrome Finish Body,

AluminumorStainless SteelBucket,

30 lt.or 40 lt.Bucket Volume,

SiliconorRubberLiner,

Dry – 180-200 lt/min. orOil – 200-230 lt/min. Pump.

Please copy and paste the following link to your browser address bar to get ourOnline CatalogforMelasty® Milking Machines & Equipments..

It is secure to download the .pdf file as well to your computer.

http://www.melasty.com/Melasty_Milking_Machines_Catalog.pdf

http://www.melasty.com/Melasty_Milking_Equipments_Catalog.pdf

3111 Long Liner (IGA)Due to the design and structure of bellows, convenient folding is provided and during the attachment of system to nipples, vacuum loss is prevented. Provides ease of use. Designed after determining the deficiencies on the other liners, as a result of R & D activities byMelasty®engineers, design owned byMelasty®.

The neural stimulation effect that is created after udder massage, causes the secretion of hormone;Oxytocin. Oxytocin hormone starts milking and facilitating milking through the bloodstream, after stimulation of nipples. Secretion of the Oxytocin hormone lasts for 5 to 7 minutes. Milkingmustbe completed within this period. 3111 Long Liner ergonomically shaped and was developed for high-yielding cattle. Wider size of claw connections with liner (Ø 14 mm.) allows milk reaches claw from nipple immediately (faster). Otherwise, the remaining milk in Teatcup, will go back to udder and crashes to nipple to damage, at high speed of70 km/hour. As a result of their R & D activities,Melasty®engineers have designed 3111 IGA to prevent such damages.

Lactic acid in the milk, hot or cold water used during the washing cycle, weather conditions, ozone in the environment and repeated movement during milking, causes the liners deformed (elongation) before expected expiration period. And this will cause reduction of strain within the teatcup shell.

As a result of R & D carried out byMelasty®engineers, on3111 IGA Liners, insertion part of liner has been upgraded totwo stages. Simply taking insertion fromstage (level) Atostage (level) Bwill bring the performance level increased back again when deformation occurs.

Milking Claw (Complete) 240cc

As a result of R & D carried out by Melasty, on 7050 Complete Claw, the diameter of Milk-inlet nipples increased to 18,5mm to get the milk easily from liner, also the Milk-outlet tube has been expanded to 21mm so after closing the claw, milk transition made more comfortable. Thus, milking time was

shortened.

Due to the vacuum fluctuations, milk gets back in to the nipples, this causes the biggest reason for udder diseases. On 7050 Complete Claw, the capacity has been increased to 240 cc to prevent this by reducing the fluctuations while milking.

3422 Single Milk Tube
&
3271 Twin Pulse Tubes

As a result of R & D carried out by Melasty, on 3422

Single Milk Hose, Milk-outlet tube OD x ID designed

as Ø25mmby Ø16mm, Internal Diameter has been

expanded for a more convenient transition.

During the hot weather conditions, hose adhesion after

softening while milk flow, has been prevented with the

wall thickness of 4.5 mm and internal diameter Ø16mm.

7003 Tube Clip

As a result of R & D carried out byMelasty®, to prevent the clamp, deforming the single milk tubes and pulse tubes; 7003 Tube Clip was produced by soft material. Due to its monolithic structure, falling during use was also prevented.

Body Frame

During the manufacture ofMelasty® Milking Machine Body Frame, the vacuum line is provided in a closed circulating system, thus, vacuum line has been isolated from corrosion that may occur on body frame(also rust, decay, holes that may occur)by use of time. 5mm sheet was used in connection with air tank and body frame, the vibration causes sound and noise has been blocked, thus more solid and strong structure was redesigned.

7005 VACUUM DISTRIBUTOR

Due to vacuum tank outlet is smaller and air partition was made in narrow diameters,
decrease in volumetric flow rate was discovered as a result of R & D carried out byMelasty®.
This problem was reduced with development ofMelasty®7005 Vacuum Distributor with
Inlet Ø30mm–outlet Ø24,5mmand air tank vacuum outlet was upgraded toØ32mm,
thus makes machine breathes more comfortable.