Mechanical Induced Draft Cross Flow Cooling Tower

Cross Flow Cooling Tower, 1.Great stability,wind and shock resistance ability, 2.electricity saving, 3.low noise - details see: https://www.machineto.com/mechanical-induced-draft-cross-flow-cooling-tower-10240617

Condition:New	Cooling Type:Cross Flow	Material:FRP	Place of Origin:Shandong China (Mainland)
Brand Name:Lanxiang	Voltage:380V	Power(W):30000	Certification:ISO9001
drift loss:less than 0.01%	noise:less than 63dB(A)	Motor power:30kw (SIEMENS)	draft type:induced draft
fan:FRP blades	drift eliminater:modified PVC	fill:100% new PVC	Structural support:hot galvanized Q235
Fastener:Stainless steel	Side panel,air duct,blind widow:FRP

Specifications:

1.low noise

2.factory fabricated

3.cross flow

4.induced draft

5.vertical air discharge

The cooling tower is of rectangular type to facilitate easy installation in any direction on roof top or on ground.It complete with casting,basin,hot water distribution frame,air inlet,float valves assembly,fans,motors,drain,over flow,bleed connections etc.Tower is designed to with stand 150kg/m2 wind load.All joints are water tight and arranged to shed water inward.Means of access are provided to all parts of the tower for easy maintenance.Steel ladder is provided for access to the top of cooling tower.Cooling tower construction is confirmed to the internationally accepted standards.

If you are interested in the low noise induced draft cross flow FRP cooling tower,please provide the following parameters:water entering temperature,water leaving temperature,wet bulb temperature and water treatment capacity,we shall offer you the most competitive prices. Looking forward to our cooperation!

Technical Parameters:

No.	Item		unit	parameters
1	Dimensions	L9000mm×W5000mm×H4200mm
2	Entering Fluid Temp	t1 =38°C
3	Leaving Fluid Temp	t2 =32°C
4	Design dry bulb temperature	Θ=44°C
5	Design wet bulb temperature	τ=27.78°C
6	TotalFlow	Q	m³/h	421
7	Cooling type	——	——	Cross flow
9	Fan material	——	——	FRP blades
10	Fan diameter	Φ	mm	4200
11	Designed Air Volume	G	m³/h	520,000/set
12	rotating speed	r/min	r/min	200
13	Motor power	N	kw	30
14	Drift loss	%	-----	≤0.01
15	Atmospheric pressure	P	p	94.42
16	Noise	-----	Db(A)	≤63dB(A)
Note: This parameter is based on specific conditions. Any difference of the conditions, pls contact with us.

Component List:

No.	Name	QTY	Brand	Material
1	Fan stack	1set	Self-produce	Φ4260,FRP
2	Fan	1set	Cooperation manufacturer	LF42
3	Motor	1set	SIEMENS	30kw
4	water distribution system	1set	Self-produce	FRP
5	water distribution basin	1set	Self-produce	FRP
6	eliminator	1set	Self-produce	Modified PVC
7	Fill	1set	Self-produce	100% new PVC
8	Casing	1set	Self-produce	FRP
9	Framework	1set	Self-produce	Q235 with hot galvanized
10	louver	1set	Self-produce	FRP
11	Cold water basin	1set	Self-produce	FRP
12	Make-Up (Auto)	1set	Self-produce	Stainless steel
13	Fastener	1set	Cooperation manufacturer	Stainless steel