Home  >  Industrial Supplies  >  Energy Saving Equipment

Stick making machine:, 1.Various product shape can optional;, 2.The competitive price;, 3.Manufacturer factory., 4.ISO9001:2008. - details see: https://www.machineto.com/manufacturer-factory-wood-stick-making-machine-10213410

Manufacturer factory wood stick making machine

1.The main structure ofWood stick making machine:

1).Feeding hopper+2.Heating ring+3.Forming cylinder+4.Propeller+5.Spndle+6.Themoal electrical pair+7.OIl seal+8.Axletree+9.Eectric board.

2.Theworking principle of wood stick making machine:

1).Using the intrinsic attributes of the wood material by spiral extruding at high temperature,under high pressure,wood elecment in wood material;

2).Then the wooden can become stick by the high temperature of heating ring and it can make various shapes,according to the different moulds.

3).There are a cuter at the wood stick making machine discharge port,so that we can control the length of final stick.The density of wood stick is compact ,so that it can fire longer time than common fuel.

3.Technical parameter of wood stick making machine:

Model	Power	Capacity	Note
GX50	11KW	120-150	Bar diameter:50mm
GX60	15KW	200-240	Bar diameter:60mm
GX70	18.5KW	280-350	Bar diameter:70mm
GX80	18.5KW	320-380	Bar diameter:80mm

4.what we should attention of wood stick making machine:

1.Fastening bolts,especially in the heatig barrel set of three top wire,connecting and electrical power lines.

2.Checking bearing lubricaion part;

3.Checking supply voltage is normal.

4.No-load starting running 30 minutes,no card,touch the abnormal phenomenon,ca be put into normal production.When the trial revealed abnormlities,should immediately stop,find out the reasons,trooubleshooting and then makes no-load operation.

5.The temperature reulator adjusted to the required temperature,when the temperature reaches a predetermined temperature before starting and amount of feed.

6.Gradually increased feeding rate,until the production of qualified products,produced when the normal 30 minutes can show trialrun issuccessful,the normal operation.

7.To make the hopper feeder with now raw material and after shutting down the machine immediately reversed for 1 minutes,so that the propeller matria would be exit.The machine body must be well grounded!!!

5.Wide range of application of wood stick machine product:

1).heating our house in winter;

2).Using barbecue:

6.The package information of wood stick making machine:

7.Friendly cooperation with international cooperation: