Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Moulding Machinery  >  Wire Drawing Machines

Manufacture LT450 water tank carbon steel wire making machine, 1.Max dia:3.2mm,Min.dia:0.6mm, 2.Speed :400m/min, 3.ISO9001:2000 - details see: https://www.machineto.com/manufacture-lt450-water-tank-carbon-steel-making-machine-10168056

Manufacture LT450water tank carbon steel wire making machine price

Why let you choose us

1, Production experience:Absorbed ,Professional for 13years

2, Each link strict control the quality

3, Our goals are not do the lowest price to do the best quality

4. Life provides you with technical guidance

5. The long-term supply all kinds of spare parts, make sure that you use perennial

6. To offer our customers workshop design

7. Choose a professional supplier will bring you more convenient

Summary:

JDLT-450 type water tank steel wire drawing machine,It can drawing ferrous metal wire and some non-ferrous metal wire. It can be widely used for: galvanized wire, wire mesh, wire cable spring and other similar manufacturing industries

LT450 water tank steel wire machine price factory saler

Technique Parameter :

1	Dia of made tank drum:	450mm
2	Drawing pass:	8-12 die
3	Max.inletwirediameter:	2.8-3.0mm
4	Min.outletwire diameter:	1.0-1.2mm
5	Total compression rate:	Almost 87%
6	Average compression rate:	Almost 12%
7	Line speed:	5-5.5 m/S
8	Take-up way:	Made tank take-up
9	Cooling way:	Full immersion with spray
10	Main control motor:	30KW motor 50HZ
11	Machine Weight:	About 2600kg
12	Size:	2520×1150×1080mm

Transmission Structure:

1.The machine including Y series motor, inverter, gear box, the water box and electrical system

2.The drawing drum by the main motor to passing through the V-belt and gear box, Storage Tank of the closing line and one pair of spiral bevel gear drive to close the line.

3,Drawing roller and the die is mounted on the water tank, drawing wire cooled by showing and immersing. Equipped with a valve inlet pipe. Outlet in the tank proper way.

4.Horizontal drawingwork

Operation Use:

Put semi-finished wire on the taking off device, install it into the drawing machine.Wire head rolled tip or file tip, and put in the drawing mold. Put the branch mold in the frame after pointing machine drawing some wire. Wire on the round tower around 1.5-2.5 circle. Tighten the wire with pliers and driving the motor. Pulled outafteracertainlength,thenthe above methodin ordertoputtheRoadmolduntilthefinishedmoldaroundthewireinthefinishedroll, you can startanormaldrawing. Mind the match of speed of wire collection and drawing machine.