Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Dredger

1.Most advanced PLC control system, 2.Quick delivery, 3.Strong adaptability of differ enviroment, 4.Good after ser - details see: https://www.machineto.com/large-output-sand-pump-dredger-10311574

Features

1.Simple, rapid assembly and dismantling.
2.Spare parts and floating pipe available.
3.Transportable by road, rail or sea.
4.Reliable hydraulic system.
5.Fresh water engine cooling system.
6.Efficient fuel consumption.
7.One-man operation. The most advanced PLC control system.

Type G (or GH) gravel pumps

Outlet Diameter 100-400mm

Capacity 36~5040m³/h

Head:5~80m

Construction of this pump is one of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°.This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion resitance.

STRUCTURAL CHARACTERISTICS

A horizontal, single-shell structure pump, flow components hardware nickel, chromium high abrasion resistant material and has good wear resistance, corrosion resistance and high reliability. Low NPSH must NPSHr.

Matrix Road off circulation and can be used for large-particle abrasion materials continuous conveyor.

Drum structure bearing components, use high-capacity bearings design, use of lipid-lubricating bearings, lubricating oil used to adapt to different conditions.

Adjustable impeller and the clearance between the board to ensure efficient operation of the pump.

Seal a packing seal, seal and play impeller assembled mechanical seal, adapt to different conditions require.

Pump and drive straight for the choice of the drive, V-belt drive, hydraulic coupling drive, drive reducer.

Pump in the direction of the export of a 360-degree rotation installation location to accommodate different installation conditions at the scene.

SEALING FORMS

1 Packing gland For the suction or gravity condition. The pressure of sealing liquid should be 35Kpa higher than the discharge pressure of the seen in following table.

2 Expeller seal In general for gravity condition the gravity head

should not be exceeded to 10% of the total head of the pump and the shaft power increase by 5% about.

APPLICATION

1.Absorb the sand in the river, lake and sea.

2.Absorb the silt and sand in the river, lake, sea, reservoir, pound, electric power plant .

3.Absorb the slurry of stone processing plant.

4.Absorb the slurry in the deep well.

MODEL	EXIT mm	SPEED r/min	PERFORMANCE			POWER kw	IMPELLERmm	MAX GRAIN mm
			FLOW m³/h	HEAD m	EFFICIENCY(%)
6/4D-G	100	600-1400	36-250	7-56	50	60	378	82
8/6E-G	150	800-1400	180-540	12-52	60	120	378	127
10/8F-G	200	500-1000	180-820	12-56	60	260	533	178
12/10G-G	250	400-850	360-1200	12-60	65	600	667	220
14/12T-G	300	300-700	700-2700	8-70	65	1200	864	241
8/6F-GH	150	500-1100	520-900	18-80	70	260	610	140
10/8S-GH	200	500-950	750-1300	20-75	70	560	686	180
12/10G-GH	250	350-700	1400-2700	10-60	70	600	915	210