Home  >  Industrial Supplies  >  Industrial Brake

1.electro hydraulic drum brake, 2.industrial brake, 3.explosion-proof drum brake, 4.different drum diameter - details see: https://www.machineto.com/industrial-electro-hydraulic-drum-brake-ywz8-series-for-cranes-10223751

YWZ8 SERIES IndustrialElectro hydraulic drum brakes for cranes

Technical data and Dimensions of YWZ8 SeriesElectro hydraulic drum brakes:

Application and main design features OF Electro hydraulic drum brakes:

1.YWZ8 series industrial electro hydraulic brakesare widely used in hoisting, transportation, metallurgy, mines, ports, and civil construction as brake gears of various machines.

2.The connection dimension and brake torque meet the requirement of JB/ZQ4388-1997. Technical conditions meet JB6406.2-1992.

3.YWZ8 series industrial electro hydraulic brakesare safe and reliable performances, smoothbrake, high frequency fo action, the brake torque is adjustable.

4.Main waging hinged points are equipped with self lubricated bearing which give high efficincy of transmission and long service life and need to lubrication during application.

5.The installation of asbestos free brake linings and brake shoes adopte insertion method which is safe and reliable and is simple and quick for repalcement.

6.No need to adjust the interloking equal clearance device which will always keep the clear ance equal at both sides of the brake shoes during application. The hpenomena of brake linings sticking to the drum at one side due to the uneven clearance can be avoided.

7.The following additional fanctions can be realized by adding special devices.

8.Release(open) or close limit switch, may indicates whether brake is properly released or closed.

9.Adopt thruster which fall delay valve as drive systerm. This can realize closing delay of brake.

Operating Conditions of Electro hydraulic drum brakes:

1.Electro hydraulic drum brake workes temperature: -20 °C - 50°C.

2.Working environment of electro hydraulic drum brake must be free of combustible, explosive and corrosive gas.

3.The air relative humidity of industrial brake is not more than 90%

4.Sea level altitude for application accords with GB755-2000 standard.

5.Mainly used for the power with 3phase ,50HZ, 380V (we can provide the products according to the customers requirements which suit for 60HZ or different voltage, so please inform us before you order if there is a special request).