Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Earth-moving Machinery  >  Excavators

CE aproved hydraulic track excavator, 21 T operating weight, Original ISUZU diesel engine - details see: https://www.machineto.com/hydraulic-crawler-excavator-xcg210lc-8b-10107375

Uptime

• Advanced John Deere Phoenix Electronic Control Systemprovides high electrical system reliability. Electrical system uses minimal relays and unsealed connections. Most circuits are controlled by the Flex Load Controller (FLC). Monitor, Sealed Switch Module (SSM), and FLC all communicate on Controller Area Network (CAN), which minimizes number of wires.
• Powered by proven, reliable Isuzu engines. The 210-8B use a 6.5 L turbocharged engine and the 330-8B uses a 7.8 L turbocharged engine. All engines are Tier 2/Stage II emissions compliant.
• Sealed Switch Module (SSM)conveniently combines most cab switches into one central location. SSM is well protected from dust and moisture, and it has a much longer life cycle than rocker switches.

• MODEL	XCG210LC-8B
  Rated bucket capacity	0.9 m3
  Operating weight	21380
  Engine
  Model	ISUZU BB-6BG1T
  Rated output	120kW/2150 rpm
  Bore × stroke	105/125 mm
  Displacement	6.494 L
  Max. torque	582.5 Nm
  Batteries	2×12 V
  Hydraulic System
  Main pumps	2x Variable displacement axial piston pumps
  Max. flow	2x 200 L/min
  Hydraulic motors
  Travel motors	2x Variable displacement axial piston motors
  Swing motors	1x Fixed displacement axial piston motor
  Relief valve setting
  Implement circuit	31.4 Mpa
  Swing circuit	25.5 Mpa
  Travel circuit	31.4 Mpa
  Pilot circuit	3.9 Mpa
  Max. bucket digging force	135.4 KN
  Max. arm digging force	99 KN
  Swing System
  Swing speed	13.5 rpm
  Drive
  Max. drawbar pull	183 KN
  Travel speed
  High speed	5.3 Km/h
  Low speed	3.2 Km/h
  Max. grade ability	35o
  Undercarriage
  Carrier rollers	2x 2
  Track rollers	2x 9
  Track pads	2x 49
  Shoe width	600 mm
  Ground pressure	41.83 kPa
  Capacities
  Fuel tank	390L
  Hydraulic tank	190 L
  Hydraulic System	220 L
  Cooling system	28 L
  Engine oil	21.5 L
  Travel reduction unit	2x 5 L
  Swing teduction unit	4.4 L
  Working Ranges
  Max. cutting height	9587 mm
  Max. dumping height	6985 mm
  Max. digging depth	6470 mm
  Max. vertical wall digging depth	5410 mm
  Max. digging reach	9780 mm
  Max. digging reach on ground	9610 mm
  Min. front swing radius	3548 mm
  Standard boom	5700 mm
  Standard arm	2900 mm
  Dimensions
  Overall length	9762 mm
  Overall height of boom	3015 mm
  Overall Width	2980 mm
  Overall height of cab	2900 mm
  Counterweight clearance	1090 mm
  Min. ground clearance	468 mm
  Tail swing radius	2870 mm
  Track ground length	3640 mm
  Track length	4440 mm
  Track gauge	2380 mm
  Track overall width	2980 mm
  Shoe width	600 mm
  Overall height of counterweight	2060 mm
  Overall width of superstructure	2710 mm