Home  >  Packaging Machinery  >  Blister Packaging Machines

size is optional, color is optional, slotter die cutter is optional - details see: https://www.machineto.com/hy-d8-series-high-class-carton-printer-slotter-machine-10053520

Brief Introduction
This machine can constitute the double-colors, 3-colors, 4-colors and 5-colors printing & slotting machines which can simultaneously accomplish the process of printing, separate cutting, creasing, slotting and corner cutting.
Function of the printing part
1.The drive part of the printing part adopts the big angle helical bevel gear drive which increases the strength of the gears and the driving stability while lowering the noise. With 45# forging-works and quench treatment the drive gears have increased the durability and life, and greatly guaranteed the precision of chromatography.
2.The printing part: The paper-feeding of the drive part adopts cross sliding transmission. The gears of the print pressing roller and the paper-catching roller adopt the planetary rocker-plate drive mechanism. The gears are normally meshed from beginning to end in the process of adjusting the space between the print pressing and the paper catching, which does not enlarge the space between the gear-top and gear-side, make the color process (esp. the multi-colors process) more accurate and lower the abrasion between the gears to the minimum.
3.The phase part adopts 360°adjusting while braking or during working. The scale will be displayed. This two kinds of adjustment which are different from the current phase adjusting, the driving and jointing parts of the large gear adopts 2 bearings to support and joint, which has prevented the sleeve joint of the current gear and the internal-gear-circle from the ends-and-surface moving up and down, easy to lock, short service life and other defects. And the adjusting part adopts the planetary, worm wheel and worm driving method, which has greatly enlarged the drive moment and raised the accuracy of adjusting.
Function of inking part:,
1.The ink distributing of the inking part adopts the rubber roller and the wire roller inking. The linear velocity has been improved according to the variety of the printing situations of the clients. The thickness of the roller diameter of the wire roller and the rubber roller has been increased which has made the rotating speed rate more reasonable, and added the stability of ink distributing during operation and the rigidity of the axle. The drive has also been improved, i.e. changed to direct drive from the original indirect wire roller drive. Under the circumstance of the space between the wire rollers can be free adjusted, there is no space between the gears of the wire rollers, which makes the linear velocity of the wire roller and the plate roller keeping consistent from beginning to end, and makes the repeated trace of ink accumulating, inking and the clarity greatly improved.
Function of slotting part
1.The slotting part adopts the method of the first slotting and then creasing which is convenient to adjust. The moving gear of the knife disk of slotting is inside-installed-type which make the operation is convenient.

Model No	Effective Printing Area(mm2)	Paper Feeding Area(mm2)	Min Paper Deeding Length(mm)	Speed (sheets/min.)	Thickness of Plate(mm)	Width of Slotting (mm)
SYK3350-2000	2000×950	2200×950	260	0-60	6	7
SYK3350-2200	2200×950	2400×950	260	0-60	6	7