HSS Pre-grind Gear Hob Cutter

1.Module: m1~m6, 2.OD:50~105mm, 3.Material:M2/M35/M42/SHK51/SKH55, 4.Special size can be accepted - details see: http://www.machineto.com/hss-pre-grind-gear-hob-cutter-10147015
Place of Origin:Chongqing China (Mainland)Brand Name:YQMaterial:HSSUsage:Gear Hob
Model Number:m1-m10,pre-grindMachine Type:gear hob machineType:GEAR CUTTER 
HSS Pre-grind Gear Hob Cutter
contact supplier for HSS Pre-grind Gear Hob Cutter


HSS Pre-grind Gear Hob Cutter

1.PA 20°

2.Single Thread or Double Thread

3.Right Hand or Left Hand

4.Hobs specified in above table are supplie with a grinding allowance of 0.25mm

5.ClassAA , ClassA

6.Material:HSS/HSSE

ModuleOutside Dia.Overall LengthHole Dia.
1

50

40

22

1.25
1.5

55

45

1.75
255

50

2.2560
2.5

65

55

2.75
37060

27

3.257565
3.57570
3.758070
48075
4.58585
59090
5.510095

32

6105100

Material Introduction:

A. W6Mo5Cr4V2 (GB) M2( ASTM), S6-5-2(DIN), SKH51(JIS)
chemical composition:C 0.85, Si 0.38, Mn 0.35, P≤0.030, S≤0.030, Cr 4.10, W 6.00, Mo 4.80 V 1.85
main application:It is widely used for making all kinds of cutters and durability cold-work die

B. W6Mo5Cr4V2Co5 (GB), M35( ASTM), 1.3243(DIN), SKH55(JIS)
chemical composition: C 0.93, Si 0.38, Mn 0.35, P≤0.030, S≤0.030, Cr 4.10, W 6.30, Mo 4.80 V 1.85, Co 5.00
main application:It is often used for making blades with high-speed and great cutting difficulty as it’s good abrasive resistance

W6Mo5Cr4V2(M2),W9Mo3Cr4V(W9),W18Cr4V(W18),W6Mo5Cr4V2Al(M2Al),W6Mo5Cr4V2Co5(M35),W2Mo9Cr4VCo8(M42),W4Mo3Cr4VSi(4341),W4Mo2Cr4VSi(4241)

Packaging Detail:oiled paper+carton+wooden case or as requirement .
Delivery Detail:within 15 days

Related Product for HSS Pre-grind Gear Hob Cutter