Home  >  Packaging Machinery  >  Filling Machines

fire extinguisher powder refilling machine GFM16-1, semi-automatic ,manual, speed: 5kg /min, Weight:110Kg, no pollutio - details see: https://www.machineto.com/hotgfm16-1-higher-accuracy-fire-extinguisher-powder-refilling-machine-fire-extinguisher-powder-filling-machine-pollution-free-10055969

hot product GFM16-1 higher Accuracy fire extinguisher powder refilling machine/ fire extinguisher powder filling machine (Pollution-free)

Model GFM 16-1 dry powder filler is a new product developed by our factory after absorbing the advantages of powder fillers at home and abroad. It can quickly suck dry powder into the cylinder and be directly filled in the cylinder of the extinguisher to be filled by vacuum fluidics; the dry powder can also be directly sucked into the cylinder of the extinguisher to be filled through the filling and cover. It can directly recover the dry powder in the cylinder of the old extinguisher. The equipment has the functions of lifting and dropping the cylinder electrically by just treading on the rise or fall pedal. It features small volume, easy movement, simple operation and lack of environmental pollution. Thus labor intensity is decreased and work environment is improved. It can fill various models of extinguisher cylinder and also suitable for filling various powder products. So it is an ideal equipment in the powder filling industry.

I. Technical parameters

Volume: 400×800×1350 mm (W×L×H)

Voltage: AC 220 V

Power: 1.1 KW

Filling rate: 5 kg/min

Filling residue: 1 kg ≤ 0.04

II. Direction for use

The filler can be used in two methods:

The first filling method:

1. Check if the connection of the hose is tight.

2. Connect the lead-in of the device to the mains and have the ground wire connected when in use;

III. Recovery of Dry Powder

1. The dry powder in the depressurized extinguisher cylinder can be recovered directly by inserting the powder suction pipe into the extinguisher cylinder. See to it that the powder should not be inserted too deeply and the inactive powder can’t be sucked out.

2. The pressurized powder in the extinguisher cylinder can be recovered by inserting the powder spraying pipe of the extinguisher cylinder into the powder suction pipe of the filler. Press the “start” (Figure 2-7) button, pull out the safety bolt of the extinguisher cylinder and press the handle, the dry powder will quickly go into the cylinder (Powder type should be identifi

IV. Other Methods of Application

Hand-propelled extinguisher cylinder can be filled by the second method as its volume is great.

V. Maintenance

1. An appropriate amount of 20# lubricant should be filled into the driving parts of the elevator before each use.

2. When the powder suction pipe is working, it should not be inserted too deeply, or blockage of pipe may occur.

3. No dry powder with serious corrosion and above-norm moisture content can be used against damage of equipment.

VI. Common Faults and Their Removal

Initially, powder can be sucked up. Suddenly, interruption happens without suction.

In the process, much powder is discharged from the filter

1. The filter in the powder cylinder is damaged and the valve of the powder cylinder is out of order.

Direction valve can’t change direction

6,

Symptoms	Cause	Corrections
Suction pipe doesn’t work after start-off	1. Too much dry powder in the cylinder	1. Open the valve below the powder cylinder and tread on the pedal of direction valve to release the powder.
	2. Pipe and its connection not sealed tightly.	2. Check the leakage and repair.
	The suction pipe is inserted into the powder too much to block the pipe.	1. Remove the suction pipe, empty the powder blocked in the pipe and clean up the valve.
		2. Never insert the suction pipe into the powder too much.
	The filter in the powder cylinder leaks	1. Repair the leakage. 2. Replace the filter and valve.
	1. The spring in the valve body is damaged.	1. Replace the spring
	2. Rubbish exits between the valve body and vent peg.	2. Remove the vent peg, clean up the rent peg and valve body and reset them.
	3. The valve body is rusty	3. Remove the vent peg, clear away the rust, apply 20 lubricant and clean up with cotton thread.

This machine has excellent features, such as small overall size, operate easily, no pollution and etc. It is special suitable for the production and maintain of fire extinguisher.

7, Feature:
1. Automatic control whole procedure:
Sucking powder from warehouse or other fire extinguisher, automatic filling, stop and cleaning of filter.
2. Accuracy:
The filler is equipped with T3806 electronic scale of great precision, constituting the controller with electric elements. Whether you fill a small cylinder of 0. 5 kg or a big extinguisher of 35 kg, all you have to do is just to set up the weight to be filled on the electronic scale. When the set-up weight is filled, the machine will stop of itself
3. Quickness:
More than 8kg per minute.
25-3- seconds for 4kg fire extinguisher
45-50 seconds for 8kg fire extinguisher
Filling range: Above 0. 5kg
4. Economy
Only one worker is needed to finish whole filling action, cylinder movement.
5. Automatic Cleaning
The filler functions to clean automatically. It will clean once after filling one extinguisher without the use of manual cleaning filter. An automatic switch for cleaning is fixed separately. For cleaning you have to press the button only and the filler will clean thoroughly of itself.
6. Pollution-free
The filler is placed in the filling shop while the powder is stored in the warehouse, separating the powder source from the workshop and completely avoiding the pollution by dust. Using the filler, powder can be smoothly filled into the fire extinguisher.

Unique advantage:
1. Automatic cleaning: Press the button only, the filler will clean thoroughly of itself.
2. Filling continuously: After filled a fire extinguisher, the work need not restart the powder outlet, in 5 seconds (this time can be adjusted by user), powder will flow out automatically.
3. Anti-corrode: Stainless powder storage cylinder.
4. Two style powder outlet: Powder outlet 1# makes filling work much easy, it avoids to waste time on aim the powder outlet to fire extinguisher cylinder inlet.
5. Powder recycles function.

HS Code:	84241000
Trademark:	SI
Model:	GSM
Standard:	ISO, National patent
Unit Price/Payment:	Pleas e kindly contact us