hot air welding machine for pvc

hot air welding machine for pvc

Characterics:

1. No glue needed,temperature and speed is adjustable,eupipped with temperature sensor,can control and test the temperature,and make it a constant temperature.No matter how the length of the tarpaulin,the splicing result won’t change.

2. High and fast heat,can splicing thick material.The temperature adjustment scope is 0°C-500°C.Equipped with temperature sensor,can maintain a constant temperature as setted.The weight is 18Kg.

If the color of the picture has difference with the actual procucts,please forgive the we won’t note.

Provide the most advanced welding equipment for the ad inkjet printing industry and PVC membrane material welding and processing industry worldwide

Usage:
1) Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge;
2) Turn on the machine, prepare warm up about 2 minutes;
3) Bring up the machine, and place the roll at the end of the overlap edge;
4) According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the Machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.

Application:

Laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface.

Technical parameter:
1) Alternant electric voltage: 220V/50Hz;
2) Upper limit power: 2000W, average 800W;
3) Adjustable work temperature: 50-600degree;
4) Adjustable: Self-move speed 0.8-15M/per minute;
5) Whole weight: 10 kilogram;
6) Size: 40cm*30cm*28cm.