High Speed Vertical Centrifuge

High speed vertical tubular bowl centrifuge, generating centrifugal force in excess of 14000 times the force of gravity. This centrifuge used for continuous separation of two immiscible liquids having different specific gravities, and for clarification of liquid.

Tubular Centrifuges are designed to separate low percentages (<2%) of suspended solids which are between 1 and 0.001 microns in size, and to separate two immiscible liquids of differing densities. Tubular Centrifuges operate at high speed, generating up to 20,000 gravities of centrifugal force, causing solids to collect inside the smooth bore of the stainless steel tube where they are easily recovered. Tubular Centrifuges are an excellent replacement for many traditional filter and membrane applications due to their high efficiency (virtually no product loss) and small footprint. Additionally, unlike traditional filters, they never require pre-coating or back-flushing and can never clog.

application:

All chemical & food processing industries

Solid-Liquid SeparationOPERATION:Up to 20,000 gravities of centrifugal force cause suspended solids to migrate to the centrifuge tube wall where they are retained. As the fluid travels up through the tube, smaller solids eventually migrate to the wall and the clarified fluid is discharged through the top center of the tube.

FLOW:Fluid flow in and out of the centrifuge is continuous while the solids are collected on the tube wall in a batchwise manner. Flow rates may be as high as 700 gallons per hour depending on particle size, density and required separation efficiency.

SEPARATION EFFICIENCY:Solids capture of up to 99.9% is possible depending on product characteristics and flow rate.

Liquid-Liquid Separation

this is a high-speed industrial centrifuge filter that is primarily used for separating two liquids and is a culmination of the latest technology with perfect designing.

standard material
thehigh speed centrifugehas a prominent frame and a high-speed tubular bowl of cs/ss 304/ss 316 and is made of centrifugal casting.

description
a slow acceleration special motor and starter operates this machine. The slurry is fed through the bottom of the bowl and the separation takes place inside the bowl by centrifugal force created by high speed. It creates separate circle of layers and comes out continuously through the bowl top and further separate discharges through covers.

process requirements
the requirement or purpose of this device is to separate two liquids that are having different specific gravities. An automatic system is preferred with duplex separators.

advantages
this item has left its impression globally, for its fine ability to separate liquids without spillage. It is thoroughly monitored during every stage of its inception and boasts of the following advantages: -
» increased daily production.
» highly economical operational costs.
» no recurring expenses.
» zero spillage due to close and compact operations.
» easy to apply and user friendly.