High quanlity PCL series Sand Making Machine

Advantages:, Simple structure, Low operation cost, Low noise, No dust pollution - details see: https://www.machineto.com/high-quanlity-pcl-series-sand-making-machine-10082163

Condition:New	Production Capacity:160~300	Place of Origin:Sichuan China (Mainland)	Brand Name:Junjiang
Model Number:PCL	Voltage:220(v)	Power(W):264~320	Dimension(LWH):4500 x 2400x3700
Weight:22.5	Warranty:all use life	Color:Orange or as your requirement	Max. feed size(mm):60
Motor powe(kw):264~320	Impeller speed(r/min):850~1450	Capacity(t/h):160~300	Overall dimensions(mm):450024003700
Weight (include motor )(t):22.5

High quanlity PCL series Sand Making Machine

contact supplier for High quanlity PCL series Sand Making Machine

I,Description:

This series of sand machine is suitable for soft, medium hard and hard material for crushing and shaping.It is widely used in various ore, cement, refractory, aluminum soil clinker, carborundum,glass raw materials, mechanism building sand and fine grinding all kinds ofmetallurgy waste residue.Especially for hard, very hard and resistant to abrasion resistance material of silicon carbide, carborundum, sintered bauxite, beautiful sand, ect. Which have higher efficiency than any other type of crusher

II,Features:

1. Simple structure

2. Low operation cost.

3. The principle of stone hit stone make low wear.

4. High crushing ratio, save energy

5. Has the function of fine and coarse grinding

6.Low noise

7. No dust pollution

8.Suitable for crushing medium hard and ultrahard materials.

9. Easy maintenance

III,Working principle:

We also called the principle “stone hit stone”.When materials into the crusher through feeder hopper, it is being separated into two parts by glassware. Some materials get into the impeller and speed-up in it.Under the high speed of centrifugal force, this material was shot out and falling down, then crushing repeatedly, such a piece of material in the vortex crushing cavity bear many probability impact, friction and grinding crushing. At lastforming multiple closed cycle, then reach the required product size by sieving equipment.

IV,Technical parameters:

Model	Max. feed size (mm)	Motor power	Impeller speed	Capacity	Overall dimensions	Weight (include motor )
Model	Max. feed size (mm)	(KW)	(r/min)	(t/h)	(mm)	(T)
PCL600	35	37~55	2000~3000	12~30	2500×1620×2600	5.6
PCL750	45	55~75	1500~2500	25~55	2700×1760×2800	7.6
PCL900	50	110-150	1000~1700	55~100	3900×2000×3070	12.6
PCL1050	60	150~180	1000-1700	100~160	4600×2350×3450	17.3
PCL1250	60	264~320	850~1450	160~300	4500 ×2400×3700	22.5
PCL1350	60	320~440	800~1193	200~360	5200×2700×3800	27.6